My xx2 runs best at 100 ohms (the lowest offered by my PS Audio GCPH) but I have a new phono stage coming today (Pass XP15) that will allow many more loading adjustments around that point, as well as a higher gain option, so I am looking forward to experimenting to dial it in this weekend and get the best performance. I will probably start at 100 ohms and work from there in either direction. I agree with all Raul writes above, and would add that you should listen to a variety of different types of music as you test each loading setting, and take time before settling on a final setting. It just depends on the entire chain of your system's variables. Good luck and keep us posted.
Dynavector Te Kaitora Rua loading
I will be using this cartridge on a Sota Cosmos IV with Helius Omega arm running into a SimAudio LP5.3 with external power supply and Audioquest Sky interconnects. Has anyone had experience with this cartridge and if so, what loading advice do you have.
The cartridge is replacing a Lyra Delos that I ran at 100ohms and 60db gain.
The cartridge is replacing a Lyra Delos that I ran at 100ohms and 60db gain.