All sounds good as to what you are doing with the stand and the coupling to the concrete floor. But on the other hand, since your turntable has no suspension, the only thing that would do differently (or at least try) is to replace the spikes on the turntable with Herbie's Tenderfoot isolation feet. Those things really work and they are not expensive.
DIY TT Stand on concrete floor - I'm confused
I've read countless articles and posts, and I'm as confused as ever. I am ready to build a stand for my turntable only. All other equipment will be on a separate unit. The floor is concrete (basement) covered with a 1/2" pad and fairly deep pile carpet. My tt is a Thorens a TD-280 Mk2, which is unsuspended. It's been modded with an MDF base under the plinth and modeling clay lining the underside of the plinth to deaden it. My current plan is to build a rack with (3) 4" OD sand-filled PVC tubes supporting a sand box made of MDF. The table would sit on metal spikes directly on the top of the sand box. The base of the stand will be coupled to the concrete floor by spikes through the carpet. That's where my confusion started as I've read to both couple to the concrete for equipment yet not couple to the concrete for speakers.
Since it'll be on concrete, I think my plan will definitely be vibration proof. But will it affect the sound, and how? Any suggestions would be appreciated.
Tom
Since it'll be on concrete, I think my plan will definitely be vibration proof. But will it affect the sound, and how? Any suggestions would be appreciated.
Tom