Hi Jayboard!
I only noticed your question today.
If you're in doubt about the PZCs as corner treatment (who's gonna blame you for that?) you could try to build your own, first.
Here are some pictures as to give you an idea as how to imitate them:
Rear view: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32143;image
Front: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32144;image
Side: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32145;image
Now, the wooden face plate is something very important!
Standard PZCs have cherry face plates, but you can choose any wood of your likings. Check out some guitar building sites for inspiration.
Use very thin layers of VARATHANE to treat the wood;
making it hard on the outside but soft on the inside of the wood panel!
Then proceed like this:
http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32146;image
Make sure there are washers between the face plate and the frame: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32147;image
Tuning the face plate can be accomplished by attaching a tuning bolt to the front bracket and the face plate: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32148;image
Good luck!
Kind regards,
Roy.
I only noticed your question today.
If you're in doubt about the PZCs as corner treatment (who's gonna blame you for that?) you could try to build your own, first.
Here are some pictures as to give you an idea as how to imitate them:
Rear view: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32143;image
Front: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32144;image
Side: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32145;image
Now, the wooden face plate is something very important!
Standard PZCs have cherry face plates, but you can choose any wood of your likings. Check out some guitar building sites for inspiration.
Use very thin layers of VARATHANE to treat the wood;
making it hard on the outside but soft on the inside of the wood panel!
Then proceed like this:
http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32146;image
Make sure there are washers between the face plate and the frame: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32147;image
Tuning the face plate can be accomplished by attaching a tuning bolt to the front bracket and the face plate: http://www.htforum.nl/yabbse/index.php?action=dlattach;topic=47451.0;attach=32148;image
Good luck!
Kind regards,
Roy.