B&W Speaker Placement

Thanks for the response. I do not have a sub or sides. Got to ease the wife into this. The sub will be next.

I have B&W CDM 9NT for two channel stereo. Make sure to have enough room behind the front two speakers. When I moved the speakers from 2ft from the wall to 3ft from the wall, the difference was big. Also, you want to place the speakers as far apart as possible without losing the center image (use female vocal to calibrate), but not too close to side walls or you'll have other problems. Then your listening spot should be about corner of equilateral triangel. Hope this helps..

Thanks for the info. Moving them out from the wall gives me better, quicker bass, and a little better depth, still not very wide with the "stage". Do you toe your speakers in? Also what speaker wire do you use.Thanks

I recently changed from Radioshack Megacable 12AWG (25 ft) to Kimber Kable 8TC (8 ft). While the change definitely gave me clearer presentation, I would say the sound stage (at least for my case) was more to do with how far the two front speakers were apart. I did lots of experiments with the speaker placements, and the sound stage was clearly related with the speaker distance. I do toe-in the speakers, which is for better focus.

Just to see how the sound stage changes, you can put your two speakers near the side walls. This will cause many other problems but to see if how big sound stage you can get.

If you haven't done so yet, I'd recommend you to check out Audio Asylum FAQ. Go to http://www.audioasylum.com/, and then at the top right corner there is "Audio Answers". Click it to go to "Speaker Positioning Resources".

Hey, Thanks again. Looks like I need to experiment ALOT with placement to find the correct position. Great info @ Audioasylum as well.