2. analog
  3. 1294525131

Apocalypse Now?—Technics sp10 problem s

I’d been enjoying my Technics sp-10 mkii for a couple of months now but recently it’s sending out signs of giving up the ghost.

When I first bought it, the start/stop function was halting in the sense that I would have to push the button several times in order for it to perform the function. Independently of that, I bought bearing grease and after adding some drops, the halting start/stop problem more or less disappeared. Great.

But then the strobe light went out. It still comes on occasionally but it’s intermittent. Unless that’s a sign of deeper ailments though, I could care less about that.

Worse: if I play a record now after first turning on the TT, the speed is obviously haywire. One symptom is that the gear mechanism is clearly audible in the form of an unusual and grating grinding sound. Playing records when it’s like this is of course out of the question. The good news is that, for now, if I let the motor spin by itself (without the cartridge on) for about 10 minutes or so, the issue goes away. That is, the speed is dead on for the remainder of the listening session (I played it for almost 8 hours yesterday with no problems), and the grinding noise is gone. The bad news is that all this may be just a sign of an impending apocalyptic failure.

So, I'd like to deal with the issue before it gets to that stage. Can someone suggest the cause? Or better: the cure. Or, alternatively, and best of all since I’m not handy enough to actually fix anything complex, can anyone suggest a reputable service shop where I could bring it? I live in Los Angeles. I’m hesitant to ship it because I don’t have the motor clamp for shipping. For all I know, that may be the original cause since the seller shipped mine without the clamp. I guess I could have a clamp fabricated if that’s my only choice.

It’s a wonderful TT and would hate for it to die so soon in our journey together. Final question: if there’s a repair shop, should I go ahead and replace capacitors, etc..? What are people’s opinions on that?

Thanks.
Ag insider logo xs@2xbanquo363

Showing 1 response by thekong

thekong
203 posts
 
A couple of months ago my friend’s SP10 MKII had the same slight grinding noise at the bearing. At first, he thought it was the problem of either the main bearing or some of the chips under the turntable chassis. However, when we switched the separate power supply to the one I had, the problem went away. It turned out that some of the electrolytic caps in his power supply had gone bad. After he changed all the caps in the power supply, all is well, and even the strobe light, which hasn’t work for a long time already, is now working.

On the other hand, I have a SP10 MKII which has erratic speed due to a bad speed control chip. I was told this is not fixable since even Technics doesn’t have that chip in stock anymore.
More to discover