Anti Cables with Simaudio


Here is yet another opinion/experience with speaker cables.

I use Green Mountain Speakers, a Monarch DAC24, and was using an Arcam A90 amp. As a non-believer in expensive cables, I seek out well made reasonably priced cables. For a long time, I didn't even think any cables made a difference. I now have a different opinion.

Three cables compared:
Cobalt Cable - 10 gauge heavy multi-strand solid copper.
KnuKfoncepts - 10 gauge light multi-strand silver coated copper.
Anti cables - solid copper cable with no shielding or insulation other than a light coating.

All these cables cost under $200, I run 4 meter lengths.

I bought Cobalt Cables Ultimate cable and used them with the Arcam/GMA setup. This setup had a very tranparent and detailed sound. I could listen to this for hours without losing interest or fatigue. For an experiment, I bought the KnuKoncepts silver cables. The sound was compressed, the highs truncated and well, the magic was gone. So I packed them up in my closet and forgot about them.

Recently, I sold the Arcam and bought a Simaudio Moon I-5. Nice little amp with great reviews. I hooked it up and wham - it sounded bad. Compressed sound, hard to listen to with little detail or definition, exagerated upper mid-frequencies. Needless to say I was disappointed and thought about listing the amp immediately and buying another Arcam. As I read some articles and got some feedback, I decided to experiment with some cables - so I pulled out the silver stranded cables and hooked them up. The transparency and detail returned but with some additional benefits, the amp sounded more dynamic, more powerful. I went back and forth for a couple days but the silver cables were significantly better sounding and brought the magic back.

So next, I thought, this can get even better and bought some anti cables after reading so many great reviews, hooked em up and the highs and detail were gone again. They still sounded pretty good but not nearly as refined as the silver stranded cable. Again I was dissapointed, the anti cables will be available on audiogon soon.

As I have heard very expensive cables at my local high-end dealer, I have come to the following conclusions from this experience:

1. a speaker wire that sounds good with one amp may sound terrible with another. It doesn't matter how much you spend.
2. The configuration and material (silver vs copper, twisted vs solid, etc).
3. All these cables are decent, one is not better than the other, it depends on the synergy with the amp and speakers.

The reference tracks that I use for my testing are:

Kaki King - "Legs", track 1 - Frame (this is a great close mic'ed acoustic guitar track with ringing harmonics, and natural reverb.
Crosby, Stills, Nash, Young, - "So Far" - track 2 - Helplessly Hoping and track 10 - Gueniverre.
Rachel Podger, Solo Violin - Bach Sonatas and Partitas - various.
Bruce Cockburn - "Breakfast" - Track 4 - That's what friends are for.

If you made it all the way through this, you must be more nuts than I am for writing it - thanks!
drewh1

Showing 3 responses by danlib1

Drewh1- I certainly understand and respect your opinion.

My experience however is that burn in with interconnects and power cables is indeed real with many cables. I can clearly hear the difference. And with the Anti-Cable ICs and speaker cables, they can sound congested and closed in at the frequency extremes for awhile. They do however blossom nicely as they are used frequently.

What really matters is how it sounds to you, so I would recommend following a burn in procedure with a cable and then comparing it to your initial impressions. Or forget the whole thing and enjoy some music!
Ahhhh- report back from time to time and let us know how things are sounding. Enjoy!