ze_ant
Responses from ze_ant
| Are the TT's of the 70-80 as good as the new ones I second the recommendation to go for an old Technics table, if you're on a tight budget or a Garrard, if you can stretch it. My current setup is 2 Garrards (301 + 401) in my den/living room and a Technics SP-25 / EPA-100 in the study :) | |
| "oldskool" tonearms Pauly, I prefer the UP-4 to the RS-A1 for 2 main reasons. The UP-4 has better extension and a fuller midrange compared to the RS-A1, which is also very very fiddly to setup properly. However and despite the RS-A1 not sounding as good as the UP-4, ... | |
| "oldskool" tonearms Many thanks Raul for sharing your thoughts. I currently own the AC-4400 and UP-4 (plus my other unipivot, a RS-A1), although I guess I'll have to start keeping my eyes open for the Satin :)Thanks again,Anthony | |
| "oldskool" tonearms Hi Raul,How would you compare the Satin AR-1S with the Audiocraft 4000/4400 or Morch UP-4 and any other unipivots you would recommend?Many thanks in advance,Anthony | |
| Tonearm Suggestions I second (or third) the recommendation for a Morch, if you want something that is still in current production. I have a preference for unipivots and preferred my UP 4 over an Origin Live Silver Taper.If you don't mind going vintage (well, sort of)... | |
| What is the lowest LOMC you guys know of??? Justubes,Ahhh...so we actually had the same cartridge in mind :)I own an original SL-15E (aka S-15E), which according to Ortofon's own spec sheet (which I've uploaded here:- http://i26.photobucket.com/albums/c147/ze_ant/orts15scan.jpg) has an outp... | |
| What is the lowest LOMC you guys know of??? The lowest I've seen is the old Ortofon SL-15E, which has been quoted as 0.067 mV (1Khz 50 mm/sec) and the lowest I've owned is an old Micro Seiki LC-80W (0.082 mV) | |
| fairchild power amp help, please... Yes, I own a pair of 255 monoblocks that uses 2 x 6L6 for each channel. Sounds good and takes up little space. | |
| help with arm types I would just like to say a great big 'thank you' to Tom for giving a brief but concise summary of the different arm types and their respective strengths and weaknesses.I was just wondering whether Tom or any other members hee could add perhaps a s... |