Musetec (LKS) MH-DA005 DAC

In a previous post, I mentioned the Ediscreation Fiber Box II (Standard Version).  I would like to share some of my initial notes of the Fiber Box II after it was inserted into my Grimm MU1 and Musetec 005 digital front end.  The signal path is now secondary mesh router > Fiber Box II > Paul Pang Quad Switch > ENO Ethernet Filter > MU1 > 005.

The notes:

• better command of when sounds start and stop
• more bass bloom
• more nuances
• more relaxed
• better resolution
• more "meat and garnishments"
• better PRAT
• closer to the stage
• superb imaging

I do extensive research before I buy any audio gear and finding reviews for the Fiber Box II was hard to come by.  The Fiber Box II like the 005 is not greatly advertised but they are both hidden gems and value kings for what they bring to the table.  If your system already has optical isolation with OCXO clocking, then the benefit for you is likely different.

Speaking of value, when I compare two like things that perform similarly, I try to think of things in ratios.  If two DACs have similar sonic performance but one costs 3 times more than the other, then of course the ratio is 3 to 1.  With a ratio like 3 to 1 or 2 to 1, there is no contest for which DAC or component I'm going to choose.  Even if the cheaper DAC is slightly less pleasing sonically, I know I can easily make up that difference with cables or other upgrades and still have funds to spare. 

I'm not married to any of my component.  If I can get the performance of the 005 at half price, the 005 would be gone in a few weeks.  With that said, I don't think I will face this dilemma any time soon.  The Benchmark DAC3 at about $2000 is a possible 005 slayer because for me it has slayed a $6500 DAC but I've done my head to head comparisons and we know which DAC won the contest.

I prefer the 005 over the DAC3B in almost all cases. However, if I had very warm speaker and other warm electronics then I could see myself going with the DAC3 over the 005.

I recently demoed a RAAL VM-1a tube headphone amp with the RAAL SR1a headphones at the dealer. The amp has some warmth, the headphones do not, and the combo sounds incredible. The Benchmark DAC3L was used in the demo. I did not have time to put in my personal 005 into the mix (it was sitting right beside the DAC3L) but the DAC3L was so perfect with that warm amp.

What that means is that I can buy a second Musetec 005 to replace my DAC3B in the Living room (all -Benchmark stack). The DAC3B will move to my VM-1a headphone only system.

@yyzsantabarbara 

I think I understand what you mean about matching warm electronics with the DAC3 and preferring that matching over the 005.  I just sold my DAC3 DX recently. Believe it or not, it's the 4th DAC3 I've sold over the years.  I'm going to miss that sound because that DAC has been at the heart of audio journey for many years but it simpy was not getting playtime. It has found a better home.  I wish I can keep them all but I have to draw the line somewhere with the components I own.

The only Benchmark product I still have is the HPA4. I thought about replacing it with the Ferrum Oor/Hypsos stack but I found that the HPA4 is a great preamp to the Ferrum stack.  I find the combo of 005 > HPA4> Ferrum Stack to be amazing. It is the best sound I've ever heard with these ears.  I can hear the strengths of each component come through the music.  I also have a Topping Pre90 in house as well to compare preamp duties against the HPA4. So far, the HPA4 is clearly better for the job. I will let the Pre90 burn in more before I make final jugement.  Of course, I would love for the Pre90 to win so then I can free up funds for other things things :). I'm playing with the ratios again. 

@sirnui I bough the DAC3 HGC 2 times and the DAC3B 2 times. I think each time was to raise funds for something else. Anyways, I am not selling the DAC3B I have left.

My feeling is that the HPA4 or LA4 would be incredible with the 005. I have not tried it yet, but I believe your findings. I have a CODA 07x preamp and the LA4 preamp. I like the LA4 preamp more with my 2 channel speakers and the 07x with my headphones. It is a close call with those 2 but the LA4 (HPA4) are so quiet.

I also had the Topping pre90. I sold my HPA4 (to raise funds) thinking I could get away with using it. The pre90 only worked with a Benchmark AHB2 amp and Parasound A21+ amp. All other amps I used with it were too ’hot’ on the volume. Big mistake selling the HPA4 since I ended up getting the LA4 and sold the pre90.

A final point. I like my LA4 premp with my CODA #8 amp even more than the CODA 07x preamp (on speakers). I do not use it this way but that combo is great.

Another, sort of affordable gear combo is the following:

Schitt Freya+ preamp (now sold)

Musetec 005

Benchmark AHB2 amp

I was amazed at how good this combo was on both my SR1a headphones and KEF LS50 speakers. When I replaced the 005 with the Benchmark DAC3B the SR1a became fatiguing.