Integrated stopped working


In 20 years of hifi, I’ve really never had issues.  Until today.  I’ve been using a Micromega M100 for almost a year.  Today, it won’t turn on.  Nothing has changed between today and yesterday.  Just won’t turn on.  Checked the fuse, it’s good.  Checked my power source, it’s good.  There is no hard turn off.  Just the standby button.  Any thoughts?
s7horton

Showing 6 responses by s7horton

Thanks for the response.  I don’t have headphones connected or another device used for trigger.  What’s weird is the red standby light should come on, but doesn’t.  I could be wrong, but would think if it needed a trigger, the standby light would at least be on?  Not sure.  I’m an engineer, but not with electronics.
Guys, thanks for all the responses.  As many have suggested, I’m gonna pull the fuse and test it.

regarding the power cord, I unplugged and replugged many times with no luck.  I have two other devices on this same receptacle, so I know I have power at the wall.  It would be strange to me that almost a year into the integrated and without it be moved at all, the power cord would fail. 
My daughter unplugged the power strip all my devices are plugged into yesterday to reset the TV (which we do on a regular basis) and everything came back on except the amp - gotta be the fuse, right?  
I’ll pull it today to confirm.  Again, thanks for all the help.
I checked the fuse with a multimeter tonight and it’s good.  So... I don’t really want to crack open the case, but it might be my only other option.
I did unplug the amp from the power strip and go directly into the wall that I know works.  Unfortunately that didn’t solve the problem.  I’ll open the case tomorrow and see if there is anything obvious and let you know what I find.
So frustrating.  It took me a while to figure out how to get the cover off.

there is no internal fuse that I can see.  I’m not sure how to “unplug and reset”. But, I have plugged and unplugged many times during my testing.

I don’t think it’s possible it could be in standby, it won’t power on at all.  Either from the remote or manually.  I’m at a loss. It’s just so random that something would happen on the power side but the fuse didn’t blow.
It’s been unplugged for hours and replugged.  While I didn’t try a new cord, I did take the cord I had been using and put it on a different piece of gear - worked as it should.  Definitely an issue with the Micromega.