Matching a McIntosh 275 amp +C50 Pre-Amp +B&W 804D3's w/ spkr cable Transparent?


I'd appreciate any/all opinion on help with identifying if/where there is a gap in my system that doesn't align with other component quality/value... Current set-up:

Front End:  
  • VPI Prime Turntable w/ Ortofon Cadenza Red Cartridge w/ AQ Water interconnects
  • Auralic Aries Mini Streamer to Tidal HiFi w/ Transparent Cable High Performance 75 ohm Digital Link
McIntosh C50 Pre-Amp w/ AQ Water XLR balanced interconnnects to...
McIntosh 275 Tube Amp
Nordost Blue Heaven LS Ribbon speaker cable

New pair of B&W 804 D3's

REL T5 Subwoofer

Furman Elite 1500 Power Conditioner

15 years ago I was a big Transparent Audio cable guy, and I am one of those that thinks it is more than Ohm's law when it comes to cables (Blinded A --> B testing sold me).  For a some reason, I morphed to AQ and Nordost.

My next potential move was to replace the Nordost Blue Heaven's with something in the Transparent line

PREMIUM SERIES

ULTRA Speaker Cable
SUPER Speaker Cable
PLUS Speaker Cable

And was hoping to get some advice on what would best align with my system.  Transparent guy said SUPER's but wanted to see other's thoughts on Transparent or other speaker cables to test drive.

(My ear finds the AQ's tend to mute the entire range a bit - others may love them - all good, just my ears).

If you are so inclined to comment... I'm currently running OEM power to all devices and test drove the Shunyata Research Venom 3's and was disappointed.  Was thinking of the Pangea Audio AC 9SE MKII Signature Power Cable for Amp/Line Conditioner/Sub and the 14's for Pre-Amp/VPI.

A lot here, appreciate any thoughts...



bpruitt1104

I sold my Transparent Ultra mm2 balanced IC’s to go to Nordost Tyr series 1 one when they where blowing them out to make room for the new 2 series. The Tyr worked much better as far as the interconnects go, but when comparing the Tyr speaker wire to Ultra MM2 speaker wire it was too close to call, and not worth the money to switch.

Are you looking at used Ultra? I’d go with at least the MM2.

I run Straightwire Crescendo III balanced interconnects and speaker wire for my Mac system (MC275 Mk VI, C1100, MCD550) to KEF Ref 5 speakers.  This setup is so transparent (for lack of a better adjective) that it reveals everything on an LP or CD, good and bad. 

The best power cord I have encountered is the Clarus Crimson (HC for amp and standard for preamp).  I also use a Kimber Kable PK14 Palladian on my CD player and the background is dead silent.
**Purist Audio Design dealer disclaimer**

Just installed some Purist Venustas Luminist bi-wire speaker cable for a customer with 804D2s.  "I can't believe how open, detailed, and fulfilling these speakers now sound" was the customers first impression...

Purist has been building the finest cables on earth for over 30 years, I would include them in your cable evaluations.

I also run a MC275 mk V in my main rig and am using AQ Sky between TT(VPI) to Parasound JC3 phono preamp, AQ Cheetah from JC3 to preamp and then MIT Oracle V3.2 from preamp to amp. MIT Shotgun S1.3 speaker cables connect amp to Alon Lotus SE mk ll speakers. I too have a REL sub but it's a Stadium lll and to connect that I use Synergistic Research Tesla REL SPEC Resolution reference. All power cables except two are Synergistic Research. 

I've always found a synergy between AQ IC's and MIT speaker cables and I imagine that synergy would also apply to Transparent as well. One thing I've done with excellent results is upgrade the DBS on the AQ IC's from 72vdc to 100vdc.

It looks like you've put together a nice system and I too would recommend replacing the Nordost speaker cables. I tried those very cables in my system as well and ended up going with MIT due to the attributes mentioned above. At this point may I recommend the following:

> Upgrade the DBS to 100vdc on your AQ IC's if possible
> Upgrade all your component fuses with Synergistic Research SR20 fuses. You could also explore other fuses as well such as HiFi tuning or Iso-clean. SR has the new Black fuse out now along with the Red and they come highly recommended but there is still ample stock of the SR20 fuses which are a major upgrade over stock and they are a lot less expensive than the Red/Black.
> Replace the fuses in your REL T5. I replaced all of the fuses in my Stadium lll with SR20 with excellent results.
> If you're using the stock REL cable, replace it with an SR cable or equivalent. (I assume you're utilizing the high level input for connection?)
> If you are running the stock tubes in your MC275, start by upgrading the KT88's to Genalex Gold Lion KT88's. When time/funds allow, upgrade V1 if you're using the SE(unbalanced) inputs.
> Replace the Nordost speaker cables. If MIT cables are a line you would consider, sign up on their clearance center page and they have some great deals on NOS cables, some discounts as high as 50%. 
http://mitcables-clearance.com/
> Add a motor controller to your VPI Prime if you haven't already. That makes a major improvement to the VPI tables. I use a Walker on my Scout and the difference is not subtle at all. 

You didn't mention your main electrical outlet and if that is still the one that was installed when your dwelling was built and you're utilizing it, that is a major bottleneck for your whole system. Consider upgrading it to an Oyaide, Furutech or Synergistic Research outlet. In fact that would be the first item to upgrade and then go from there.

I know that's a lot of info to digest but these are items that myself and a whole host of others have found that make major musical/performance improvements.

Cheers