stringreen
Responses from stringreen
| Tone Arm Help for a newbie I agree with Tobias | |
| Turntable Hum Has it ever behaved and if so, what change happened that initiated the problem? | |
| Turntable, Vinyl help................please I tend to think you should aim higher. A very reasonable and wonderful table are those made by Rega. As good as the table is, the included arm is even better than the table. If you do get Rega, get back to me and I'll tell you those little secrets... | |
| Subwoofer "Thumping" My thought is that the arm/cartridge has a resonance mismatch and the woofer being able to respond to those low frequencies, is only doing it's job. What kind of arm/cartridge do you have - I suspect an arm with high mass, and a cartridge with lot... | |
| benz ref 2 or sumiko celebration I have a benz ebony high output and love it. Remember the higher the output, the less the head amp has to do. I hear no hum or noise and absolutely wonderful 3 dimensional effortless sound. | |
| Best Support For Rega 3 I use 3 plastic rods under my Rega25 positioned so that with a slight push, the whole turntable is able to move slightly front to back. I have this on a plastic shelf supported by 3 cones. I use all of Expressimo Audio's upgrades and the resulting... | |
| Best tonearm position for VTA? I've been doing this for more years than I want to admit. I've always had to lower the back end slightly. I now use a Benz Ebony - lower the back of the tonearm (weight side) down slightly. |