Long cables from turntable or phono stage


Hi I have a question that involves a compromise. I have a turntable that (for various reasons) has to be positioned a little distance from the hifi, about 4m of cable. Would it be better to connect the turntable (transcriptors hydraulic reference, ADC XLM ii) to the phono stage (moon 110LP) then run long singled ended cable to the amplifier or should I run long extension cable from the turntable to the phono stage and use a short interconnect from the phono stage to the amplifier? For visual reasons the latter is better. Any thoughts?
(Amp is plinius tautoro/SA103, speakers confidence C1 Dynaudio, tautoro is the line stage only version).
ninox
Thanks for the link, Nick. I'm going to try a pair of the 2549 Mogami cables.

Al, it appears as though there may be a capacitance mismatch, so I may need to add capacitance using the device you suggested after I install the Mogami cables. I'll do some careful listening first. The sound is superb with the AQ cables I'm currently using, with no HF roll-off or thinning. There is a low level sizzle that I can hear if I put ear close to the HF driver, but not audible to me at my listening position. I hope shorter cables carefully routed will end that sizzle. I think the 2549s are designed to resist such interference.

db
Nick, I forgot to ask if you're pleased with the sound of vinyl using the Mogami 2549 cables. I'm close to ordering, but need to exchange the locations of the Parasound JC-3 and Sony 5400ES so I can determine the length more accurately.

db
I think they sound great, since trying them on my TT, I also made myself a pair of 8ft ICs for pre to power amps connection. I used Canare connectors.

The green wire covered by silver tech flex looks pretty nice, I have pics on my system page.
Nick,

LA Pro Audio recommends Mogami quad 2534 with ProFi RCAs. They are supposed to be exceptional for isolation with excellent sound quality. Nearly three times the cost of 2549s, but still not very expensive. I think 2.5' cables are all I need. I've been advised that I can use the existing ground wire. Lifting the TD 124 from its plinth is more than I want to try, so I'll leave that to an expert.

db
Db,

Are you soldering your own terminations or will you be buying a finished product?

If you are buying the bulk cable, Redco sells the 2549 at 0.80$/ft and the 2534 at 1.12$/ft.

2549 has lower capacitance but not by much and the 2534 is better for noise cancellation.