It is straightforward as long as the leads to the driver are not soldered on. I've replaced bad drivers before (darn kids) but only one tweeter. Just be sure to note which wire goes where and remember there may be some pretty strong magnets involved. Good luck with the project.
To repair/replace Utopia Be
I have a pair of Diva Utopia Be. Last weekend, I noticed some weird sound from the speakers then I found the Be tweeter was broken (a hole on the dome...not sure how it gets there)
I have ordered a new tweeter from a local dealer, as the speaker is pretty heavy and the dealer told me the technics involved in replacing the unit is pretty straight forward (unscrew the screws and then connect the wires to the unit) I decided to replace the unit by myself. Anybody has similar experience on this please let me if there is anything I shall pay special attention to when replacing it.
Many many thanks.
Eric
I have ordered a new tweeter from a local dealer, as the speaker is pretty heavy and the dealer told me the technics involved in replacing the unit is pretty straight forward (unscrew the screws and then connect the wires to the unit) I decided to replace the unit by myself. Anybody has similar experience on this please let me if there is anything I shall pay special attention to when replacing it.
Many many thanks.
Eric