Audiophile recording and playback - Tascam DA-3000



Hi, some months ago I bought the Tascam DA-3000 recorder, having used a small Korg MR-1 for some years. I mainly record from my vinyl rig (Lyra Atlas – SME V – Hanss T30 – Aesthetix Io Eclipse – Einstein The Tube mk2).

I have found that even with the hassle of very big files (one LP = almost 3 GB), the dual speed DSD sound is superior to anything digital I have heard so far.

In my rig, analog blows digital out of the water, but this is the best candidate.

In a former thread, someone asked, is the Da-3000 ‘audiophile’ level. The answer is a clear yes.

This is the first digital recorder I have owned (after some DATs and others) that does not make me ashamed that my old analog and much-modded Revox A77 stands in my loft. Also, for some, the Tascam may be a good investment since its DAC may outperform the DAC you already have. I had a Stello DAC that went out the door.

However, some aspects of the Tascam are problematic, and others can probably be improved.

A first issue is connectivity and ease of use. It would be great if the Tascam could record to a hard disk, or at least play back from it. The manual says a hard disk can be connected through the USB port. I bought a Seagate Wireless Plus 1 TB hard disk to try. However, the Tascam won’t recognize it, even when I reformatted to Exfat (instead of NFTS). Perhaps it would be recognized if I reformatted to FAT32, but then I would not have any use of a big hard disk, the limit is 32 GB I think. So I am back to recording to my 32 GB Sandisk SD card, eight LPs or so, with hand written notes, what track is what title, and then carrying the card and paper to my main PC, naming folders and transferring the files. BTW this was very slow, 19 mbps, since my card reader was not USB 3 compliant, I changed, and now it is much better, 84 or so mbps.

The ideal would be to have the Tascam drive as a unit on my home network, this is why I bought the Seagate wireless, but as stated - no success so far.

Experiences with the Tascam (or similar), in this and other respects, are welcome.

Note that, the problems so far are minor, for me, compared to the benefits. The sound is usually much better than what I get from CDs or the web (excepting some SACDs). I can bring my analog rig around, so to speak, playing back on the Korg Mr-1 (or the Tascam itself, which is light weight and semi-movable). I think that DSD playback will become more easily available in the future. If Pono had included DSD, I would have bought one.
Ag insider logo xs@2xo_holter

Showing 5 responses by rodge827

Just picked up a used Decware modded version of the DA3000. Jury is still out but I do like what I'm hearing. I like the NOS Dacs, but this unit with upsampling and Decware output stage takes this unit to a completely new level! Steve provides a sample card recorded in DSD which is exceptional and rivals many of the best stock/modded Dacs I have listened to over the last many years!

Chris 
dgarretson,

If I use the DA 3000 for playback only (SD Cards, SPDIF Input)

1) Does the Live Clock improve the sound?

2) How would I install (which connections to use) the Live Clock to benefit SD card/SPDIF playback?

TIA

Chris
dgarretson,

Thank you for the response and the information :)
Looking into one and hope to purchase soon.

Chris
 I have another question which is kinda basic but before I jump into an external clock I need to ask...
To connect the Live Clock I would use a BNC Cable from the Word SYNC Out from the Tascam to a Word Clock In on the Live Clock, Then another BNC cable from the Live Clock Out to the Word Sync IN connector on the Tascam?

Then go through the menu and sync accordingly?

Sorry if this is too basic but my gear in the past was always internally modded with upgraded clocks.

Sorry OP not trying to hijack the thread...this is my last post regarding the live Clock

Chris