riasillo
Responses from riasillo
| -3db limits for dummies I was just looking to change whatever I could to get better sound...but good to know you don't usually mess with those settings...at this point I'm awaiting new receiver. my audyssey won't work right on onkyo. guessing more than pre outs got fried... | |
| -3db limits for dummies Chase, best bet might be to find a used pair of lsi9s so your center is timbre matched and use one for the center channel (or both if wired parallel, i think that's how you would use 2 speakers for center, but not sure... ask that question in spea... | |
| Whole house re-wiring question having just had a bad low voltage guy do a bad job that resulted in a shorted wire, and the fact that my electrician pointed out before the final product was finished that the low voltage guy did a bad job and should have protected the wires by ru... | |
| 5 Channel receivers with Pre outs- where are they i'm conflicted...I'm going to use external amp so not worried about the watts on each amp. If i'm going to get a new receiver how much should 4k video capability play into it... probably 2 years away from content and most TVs capable and I just bo... | |
| -3db limits for dummies thanks.... as confused as ever... but appreciate it... | |
| 5 Channel receivers with Pre outs- where are they Rw. Thanks. I think I like the look the price and warranty on the emotiva Thanks to everyone for suggestions. | |
| Strangest problem I've ever had plugged Ipod into B&K. she sings... music to my ears... thanks to everyone for help, trouble shooting, learning how to use a meter, etc etc... great community.. thanks again. | |
| Strangest problem I've ever had jea 48. low voltage guy passed wires around studs in the front between drywall. I questioned it, not knowing any better and he said it was fine because the drywall guys could see it and work around it. Hard lesson learned. also cost me a perfectly... | |
| Strangest problem I've ever had Ding ding ding... we have a winner. Thanks to Al and MEtro04I calibrated meter as per Als instructions, and touched the wires to AC cover screw as per metro.red wire, the one that arked, reads 0 resistance..black lead didn't move. So red wire got ... | |
| Strangest problem I've ever had when i test the wires they read no resistance. dial swings from infinity all the way to beyod 0 the second i complete the circuit. same as on the non suspect wires...the wires in the wall are perfect as far as I can tell. is there any way to test ... | |
| Strangest problem I've ever had so i tested with meter. I dont have much experience with meters, tested some circuits at first job but it was always under direction. Both set ups respond the same. i had to crank up ohm resistance on meter to get a reading. First time around both... | |
| Strangest problem I've ever had Thanks for responses. On way to get a meter to test wires. I do think the wire got compromised . Low volatage guy did his thing, then electrician did his, then sheet rock guys. Someone probably hit that wire...but I also think the onkyo pre outs a... |