Help with VTL TL 5.5 Preamp


I recently acquired a Vacuum Tube Logic TL 5.5 preamp. It utilizes 6 tubes: (2) x 12AX7 and (4) x 12AT7. In trying to get to know this preamp, I've rolled several different combinations of tubes, BUT I cannot get the highs to sound smooth and "sparkly."

The preamp images well, has air and texture, is great sounding in the mid-range, good bass slam, etc., but the highs are driving me a little nut... sharp, edgy and too much grain. The highs can get in your face and blow you back a bit.

I've used various combinations Mullard, Telefunken, Mazda and Brimar. Right now, my set up is: (2) Mullard 12AX7A and (4) Brimar 6060 (T-Logo). All the tubes I've tired have been matched.

Any thoughts, suggestions or experiences?
bside123
Bside123, below is a recent ( 12/10 ) email from Steve regarding the VTL 5.5 mating with his DNA Amps.

Hello James -

Thank you very much for your kind words - I am very pleased to hear that you are enjoying your McCormack amplifiers!

The VTL 5.5 looks like an excellent preamp and should mate well with your DNA amps. It has both balanced XLR and single-ended RCA outputs so it will drive either amp, or both at the same time if you wish. Its output impedance is very low (under 200 Ohms) so it is a perfect match for both amps. The one potential problem I can see has to do with its high gain (20dB) and "conventional" volume control. In truth I am not certain exactly what volume control is in the 5.5, but it seems to be a rotary potentiometer (motor-driven for remote-control). If so, you may find your system volume going up quickly as you turn the volume knob. This is not a performance or sound quality issue, but you may find that you are only able to use the first 1/3 or 1/2 of the control's rotation, and it may not track perfectly at very low volume (the L-R balance could be off slightly). I mention this because of your comment about adjusting the volume with your Nuforce preamp. Still, the only way to be sure is to try it, and my guess is that it will work fine and sound great.

For future reference, if volume control is an important issue for you, try to find a preamp with a high-resolution volume control - one with 70 - 100 steps (or more) and .5dB (or less) of adjustment per step. This will solve the volume adjustment issue.

Enjoy!

Happy Holidays,

Steve McCormack

I hope this helps in regards to the pre/amp synergy......
Jd_df: Thanks for forwarding the email from Steve McCormack.

I'd never really doubted that the McCormack amps would provide a synergy problem. The particular McCormack amps I am using are extremely revealing, so moreover, I've been wondering about the high frequencies in the preamp itself.

A few people have written to me suggesting RCA 12AX7 tubes. In light of all of the tube variations that have been suggested, I guess I'll have to continue to experiment until I find the right combo. The Brimar quad as well as the Mazda quad of tubes I've tried are renowned for being both airy and smooth.

Maybe this preamp is not be my cup of tea, but I am not throwing in the towel as of yet. My overall sense is that this is a fine preamp, so I'll keep working with it a bit longer. It is definitely way different sounding than a older Conrad Johnson PV-12 that I have in another system. I've rolled the tubes in that preamp, and it sounds very sweet, and than again it sounds very "Conrad Johnson."

Thanks to others for their responses.
Perhaps the sharp and edge treble that you hear may be coming from another component, maybe from your source. I've never felt the sound of VTL to be harsh. I've also owned Conrad Johnson preamp before, and I agree VTL is probably polar opposite of CJ. I found the sound of CJ to be rather dull and uninvolving, while VTL sounded bright and dynamic. If you liked CJ preamp trying to get VTL to sound like it may not be the best approach.
Jylee: Thanks for your thoughts. Those same thoughts haven't passed me by as well.

As far as the CJ goes, I simply like it... kind of a nostalgic or sentimental thing. I am very aware of its limitations, even after some upgrading. Still I like it.

No, I don't want to make the VTL sound like the CJ, and even though I said I like the CJ, I have actually been considering replacing it with the VTL in that particular system... if I can get the VTL to where I like the highs.

I've compared the VTL 5.5 to: Conrad Johnson PV-12, Eastern Electric Electric MiniMax Linestage modified & upgraded by Tom Tutay and McCormack MLD upgraded by SMc Audio to Ultra Platinum.

The sources have included: Nottingham TT w/Clearaudio Maestro Wood Cartridge, VPI HW-19 MKIV (modified) with Transfiguration Phoenix MC cartridge, Ayre CX7eMP CDP, Eastern Electric MiniMax CDP, finally Computer Based Music (Mac) through a dB Audio Labs Tranquility Signature Edition DAC.

Still I get the same results in the highend of the VTL... oh speakers have been: Dunlavy Towers, Acoustic Zen Adagio and DeVore Gibbon III (upgraded). Janis and Fritz Speakers Subwoofers.

What am I missing?