Bluesound Node N130

Is Audio Clock Trim specific to the 2i model?

I don't see it under the audio settings on my N130 Node.  Just shows:

Replay-gain

Select Output - shows my Denafrips DAC selected

Volume Limits

I have the Node 130 and a Denafrips DAC.  Denafrips said the Node works better with a USB to their DACs.  Maybe that's true for other DACs also.

https://support1.bluesound.com/hc/en-us/community/posts/4406362800151-Audio-Clock-Trim

So there is no confusion about the clock trim function, below is a post from TonyW of Bluesound…

”The Audio Clock Trim switch was added to adjust an issue with some specific chipsets of external DACs. If you are hearing noise, dropouts or jitter, please disable Auto Clock Trim.”

You have probably already done this, but mine was doing this and I unplugged the ethernet and power cable for 5 to 10 min and then re-booted it.  It fixed it.  

I had a very similar issue with my 2i when connected to my Wyred4sound DAC 1 LE. It took me a couple of days to figure out the problem. It was, like others have said,was the Audio Clock Trim.