Review: Audio Desk Systems Vinyl Cleaner Tweak


Category: Accessories

Summary: I hope to express my evolution regarding the importance of, and the benefits of cleaning lps.

History: I've been a music lover all of my life. The effect music has had on my life has been immeasurable. I know now, even more, how music (effectively and honestly presented), can have a positive impact on life.

Here we go. Over the years, I've developed a cleaning regimen. An effective one at that. But, there was always an "elephant" in the room, so to speak. That elephant being, using the vacuum cleaners out there has been a useful but ineffective tool, because, one is constantly trying to clean away crud by "brushing away", (supposedly), the contaminates set deep into the lp grooves. In reality, we are imbedding some of the crud, deeper into the grooves by this time honored process.

My current cleaning regimen: I lay an lp on a clean microfiber cloth, administer Audio Intelligent Enzymatic fluid by way of a VPI bristle brush (that I always steam clean after each lp). While this is working it's magic, I'm waiting for my steamer to reach operational value. I then clean one side, repeat for the other side. I then take that lp into another cleaning station where I administer Audio Intelligent Archivist Formula with a separate applicator, and vacuum that off on my Record Dr. Then after the two sides are done, I take it to my VPI 16.5 and use Aquafina water on a dedicated brush to spread that across the lp before it is vacuumed up. During all of these processes, I clean the velvet pads with my steamer. I have separate cleaning brushes for each individual stage. This prolongs the 'pads' life.

My middle name should be "Anal". That's cool with me. Lp's are like my children. I'd do anything for them.

I do as much record buying by way of "events" as I do by mail order. I think to properly get across the effectiveness of this product, I need to convey my experience with an lp I purchased new and that has evolved with me in all of my evolution of audio.

Shawn Colvin "Steady On". My most played lp of all time. I even purchased an additional copy after believing my original was becoming "worn out". I just played it again after putting it through an Audio Desk cleaning. The loud ticks & pops that I've listened to for decades are now at the most, negligible, at the least, non-existent. This is important, this is an lp I purchased new, been under my control all of it's life. I know this lp!

Sonics: What I've noticed immediately was, leading edge transients were more relevant, more 'a part' of the musical whole. The air, bloom, headroom, normally associated with a good set-up, seems to be integrated naturally. Not a big deal, (It really is).

Other aspects: With the vacuum cleaners out there, we always have static introduced by the cleaning process. This most likely comes from the velvet pads. I became a slave to, (after my past/present, anal cleaning process,) constantly using an antistatic gun before each side. Thankfully, this is no longer necessary. Actually, subjecting an lp to the usual carbon fiber brush before each side is a thing of the past! Additionally, having to constantly clean your stylus is not necessary. Put an lp through the Audio Desk, put that lp into a clean anti-static inner sleeve.... AHHH! Since dust doesn't stick to an Audio Desk cleaned lp, if you notice any at all, just a blow will get the job done. Am I getting through to you now!

I think you may be "getting it"! It's fully automatic. Go listen, come back later. It's clean and dry!

For me, It's the ultimate, a life saver. I can sit back an enjoy each and every side of any lp, knowing all the while, I've done my part. Now, the question is, Have you done yours?

A caveat: I will continue to steam clean every lp before it sees the Audio Desk. There is the cost of the "barrels, fluid/water" and such.

With my dedication to vinyl done right, I can't think of any other product that brings me more joy and satisfaction than the Audio Desk System vinyl cleaner. ( I have NO affiliation with the manufacturer or it's importer).

As I stated earlier, my middle name is still "Anal".

Long live analog!!




Similar products
I have had a regimen I've developed through the years. The following is a list of products I currently use:

(1)Record Doctor
(2)VPI 16.5
(3)Mapleshade (original) steamer
(4)Disc DR. @ VPI velvet lips
(5)Audio Intelligent fluids
(6)VPI lp cleaning brush
(7)Various microfiber cleaning towels
128x128slaw
Great review. I have an Audio Desk Systeme RCM and love it. I did have a mechanical and the dealer and manufacturer did repairs very quickly, handled all costs except return to the US dealer and were very supportive and quick with communication. I have cleaned about 1000 records with it in the past year and would purchase again in a minute.
Thanks guys. You've helped to reinvigorate me in terms of trying my best to help others. "This is what I thought the whole thing is about".

If I had a hand in some sort of re-design, it would be the following:

The top casing, where either side of an lp enters/exits the machine casing: I'd fashion some sort of "guide" out of a slick, non-static material so the lp can be washed without the "wobble" effect that is more noticed with thin lps. This, in my experience could eliminate or reduce the remaining water after a cleaned lp. Maybe a very slight re-design of the "wipers". Very slightly longer?
The wipers squeegee action can be improved by the following tweak I read somewhere: gently remove each wiper using tweezers. Get 2 paper-coated wire ties, the kind that commonly came with plastic bags, and put 1 behind a wiper- push both the wiper along with wire tie behind it back into the recess. Each tie should be a little longer than the wiper so it extends out the front a little bit. Repeat on other side.
The wire tie will slightly extend each wiper out further more effectively removing fluid. I did this on my Audio Desk and it certainly improves removing fluid.
Thanks Hiendmuse.

My comments should be taken from now on as this: when looking at the machine from the front, there is a right & left side. The right side has more contact within the workings of this machine. The drive rollers (unseen) that contact the lp are positioned more towards the right side, the barrels and their constant motion happen to position more torque towards the right side. This leaves the left side to wobble at the left side. A replaceable, low/no static insert machined into the top of the cabinet on the left side would remedy this wobble and have a substantial affect on the wipers performing better.
Update: I failed to mention the 'filter' is also white.

I've cleaned maybe 150 lps by now. As I stated earlier, the WHITE barrels and now the WHITE filter doesn't lie! It's very telling how, after my initial steam cleaning of lps and then putting them through the AD cleaner, how these white filters are turning black. This is the "crust" of the issue folks. This is indisputable evidence of how superior this machine is to the others I've used.

Every lp sounds better, no doubt.