z32kerber
Responses from z32kerber
| Need some help picking my first MC Cartridge I started with the Hana SL and now have the ML. Love it. | |
| Questions on Dedicated 20 amp home wiring I installed two 20 amp circuits. One for my Pass Labs XA 60.8 mono block amps and one for my pre amp, CD player, turntable, and other accessories. I used 10 gauge wire (not fun to pull and maybe overkill), audio grade receptacles and nothing speci... | |
| Turntable is the most expensive in the chain, do it make sense It makes sense to me because it’s the best sounding part of my system. | |
| Can’t buy output tubes anywhere except from manufacturers at high prices. You might try Eurotubes. www.eurotubes.com. I have bought many tube from them. Great people. | |
| Pass Labs XA30.8 vs XA60.8 moon blocks The Chapman T7s are 4 ohm speakers with 90dB sensitivity | |
| Pass Labs XA30.8 vs XA60.8 moon blocks @tomcy6 thank you for your response. I have Chapman T7 speakers which I recently had Stuart Chapman Jones rebuild/upgrade. They sound great on my XA30.8 amp. Imaging and sound stage are very good (depending on the recording of course). | |
| Suggestions for Phono Preamp Gold Note. I have the PH-10 and PSU-10. | |
| I was happy with my system for 30 years; now I need a new amp...and more? I was faced with the same thing with my 30 year old system. One thing lead to another and I ended up replacing everything except the speakers which I had rebuilt. | |
| Wayne's Audio Turntable Periphery Stabilizing Outer Ring I second the super easy to use comment. Takes mere seconds. | |
| Wayne's Audio Turntable Periphery Stabilizing Outer Ring I have one. It made a huge difference. Cupped albums are now dead flat. The sonic differences are noticeable. Worth every penny. | |
| If I wanted to make my own speaker cables, is this a good choice for wire? RAMM audio OCC cable. Amazing. | |
| Best Phono Preamp mm/mc under $3500.00 used Gold Note PH-10 with PSU-10 power supply. | |
| Custom Window Sound Blockers It would cost $8000 to do my room. I spent a fraction to get good results. | |
| What speakers work with low wattage class A amps My 90 dB Chapman T7s work very well with my Pass Labs XA30.8. | |
| Solid copper or stranded copper for speaker cables? What is your choice and why? I went with OCC cables from RAMM Audio. I really like the topology of these cables. Six individual conductors each with six OCC wires. Great shielding, A bit of a hassle to deal with all those wires when connecting to the terminals but well worth ... |