thxphotog
Responses from thxphotog
| Gain setting for both pre-amp and Audio Research power amp w/ high output cart If this was my system, I would adjust the amplifier’s input sensitivity that gives me the most usable range on the pre-amp’s volume control. brf, thanks very much again, for taking the time. So I think I’m on the right track. The way I have it no... | |
| Gain setting for both pre-amp and Audio Research power amp w/ high output cart Thank you for this reply! I will continue to play, but want to reiterate, it's sounds amazing right now. I just have a feeling it could be better w/ a lower noise floor.10-03-2018 8:20amMy Bryston BP-26 to Bryston 4B-SST² used with a typical CD ... | |
| Gain setting for both pre-amp and Audio Research power amp w/ high output cart Sorry, I did not equate dials with trim pots in your post. Your MM cartridge has an output 6.8mv and your amp’s input sensitivity is 0.6v. The DMC-10 provides 30db MM gain and 10db line level gain, for a total of 40db. Gain required to drive you ... | |
| Gain setting for both pre-amp and Audio Research power amp w/ high output cart Yes, as mentioned in my post they're at 10 on a 100 dial. Last night I turned them even lower and turned up the gain on the power amp to compensate. Keeping the 'reference level' on the preamp volume knob at about 11:00. might be better but aga... | |
| Two different amps to same speakers for two different applications? Just why I came here. Thanks for the info. Will explore options.... I think before I would ever run a switcher box of any sort, I'd simply unhook wires at the speaker and hookup the other to keep the signal as pure as possible. Thanks again! | |
| Best preamp output option for headphone amp hookup? The shortest path from the DCM-10 to your headphone amp is almost certainly through the tape output. That's how I connected my headphone amplifier. Roger that. Thanks very much for the response! |