southernphoenix
Responses from southernphoenix
| PS Audio Power Plant Premier THD Output Results I think you would need an THD meter and from what I understand those are very expensive so your best bet is to buy a PPP or find someone who will let you use theirs to check your THD.I am currently getting about 2.5% THD input which from what I ha... | |
| PS Audio Power Plant Premier THD Output Results I'm sure the P5 is better, it also costs $3,500 which is way more than I can afford and would ever spend on a piece of gear like this.I'll stick with my PPP for now and one day when I can get a used P3 or P5 for under $1,000 I will upgrade. | |
| PS Audio Power Plant Premier THD Output Results Roscoeiii,Please send me a message via private email. | |
| PS Audio Power Plant Premier THD Output Results Addendum:I sent PS Audio a reply asking them why I was told one thing by one employee and the opposite from another and they just responded.Apparently, the other employee thought that I had said that I was getting .1% THD on the output when in fac... | |
| PS Audio Power Plant Premier THD Output Results Thanks for all of the responses, I appreciate it.I am currently getting 2.5% THD on the Input reading on my PPP and about 1% THD on the Output side.I had sent a question about this directly to PS Audio a few days ago and they replied and said that... | |
| Power Amp for Magnepan MG 20.1's I've already purchased the D-Sonic and will have it next week.I feel confident that it will be more than adequate for my purposes.For the record I don't tend to play my music or movies at the same high levels as most people and in the 15 years tha... | |
| Power Amp for Magnepan MG 20.1's I've taken the plunge and am getting a D-Sonic Magnum 3500-7 power amp which will give me 1,000 watts per channel at 4 ohms.I will be bi-amping the front speakers so I will then have 2,000 watts for each of my Magnepan 20.1's. That should be more ... | |
| Power Amp for Magnepan MG 20.1's How about the Wyred 4 Sound MC-7 7 channel power amp?It has 500 watts in the front three channels and 250 watts in the four rear channels.I'm assuming that if I used this amp I would be able to bi-amp my Magnepan 20.1's using two of the three fron... | |
| Best subwoofer under $1,500 for Magnepan 3.6R Thanks to everyone who responded to my question with so much detail and information, I really appreciate it.My thanks to "Jallen" for recommending the James Loudspeaker EMB 1000. This looks like the way I will be going.Has anyone else here ever us... | |
| Best subwoofer under $1,500 for Magnepan 3.6R I've also been considering the Revel Concerta B12 sub. Has anyone tried one of these with the MG 3.6R's? | |
| Best subwoofer under $1,500 for Magnepan 3.6R What about the Velodyne Optimum-8 subwoofer? Has anyone had any success in marrying one of these subs to a pair of Magnepan MG 3.6R's? |