johnnypeepers
Responses from johnnypeepers
| MMF 2.1 azimuth/tonearm lifter problem No, the VTA base screws were tightened the whole time. I had already performed the VTA tonearm leveling (and tightened the two allen wrench bolts back) before I noticed the uneven cartridge. Even if they were loose, the base and the tonearm lifter... | |
| MMF 2.1 azimuth/tonearm lifter problem Maybe I did not explain what I did accurately. As I understand it, the VTA adjustment raises the base of the tonearm by way of two small allen-wrench screws, this is not what I am referring to. I loosened a small flathead screw on the rear of the ... |