holco
Responses from holco
| Thiel Owners Andy2,The measurement was taken from the listening spot with Dirac Live in my living room, there is no way to get perfect measurements without a treated dedicated audio room, that I don't have :(The device I use to compensate my room with great ... | |
| Thiel Owners Tomthiel,I know the numbers are not correct, I just wanted to show the theoretical effect of the difference between the two values to get an idea how large the impact will +/- be ;) | |
| Thiel Owners Looking at my last Dirac Live measurement there seems to be a shoot over around 800hz > 1000hz, so the 30hz won't be a loss at that point.[URL=https://picturepush.com/public/16097034][IMG]https://www1.picturepush.com/photo/a/16097034/1024/Thie...] | |
| Thiel Owners tomthiel,The coil's are completely waxed, don't know how hard the layers stick to each other, if I demolish them I lose the guarantee to get new one's.I suspect that the woofer is 4ohm, with a 6db crossover a 0.72mH coil cross at 880Hz, 0.75mH wil... | |
| Thiel Owners Measured the received Jantzen Cross coil’s, the two 0.15mH measure both 0.152 but the two 0.72mH Jantzen wax coil’s measure 0.749mH and 0.750mH :(This will lower the crossover for the woofer about 30hz (880hz vs 850hz), my first thought is to send... | |
| Thiel Owners beetlemania, I'm aware of the do's and don'ts placing coil's, how to placing coil's near capacitors is new info for me, thanks for the link :)But like you said, there will be more space on the bigger PCB's, and if Jim Thiel didn't calculate the sp... | |
| Thiel Owners Got all the parts for the final upgrade, next thing is designing the layout on the new PCB's | |
| Thiel Owners andy2Great info!! Thanks :) | |
| Thiel Owners Jafant,My Audio-GD 40kg dual mono power-amp is super stable and drive's the CS-2.4 with verve, some specs, 2x 250W / 8ohm - 2x 500W / 4ohm - 2x 1000W / 2ohm and max 2x 1000W / 1ohm, higher loads than 1000W will tricker the protection, there was ne... | |
| Thiel Owners Correct, I meant the driver frames, the results will be easy to check when unplugging the ground connection.Btw, sorry for my crooked English. | |
| Thiel Owners Tomthiel,The idea is to connect the chassis of the unit's to ground, not the coil's of the unit's, will find out how when I remove them. | |
| Thiel Owners Changed my plans!! Resently I changed my van den Hul Magnum loudspeaker cable's for the Supra PLy 3.4/S cable's, this are screened loudspeaker cables and the screen needs to be connected to ground on the power-amp, although they are relativ cheap... | |
| Thiel Owners For my CS-2.4 I am also thinking of replacing the internal cabling with the HGC 99.999% pure silver wire (Teflon sheathed and twisted +/-), 1mm diameter for the coax and 2mm diameter for the woofer, what do you guys think? | |
| Thiel cs2.4 upgrade to cs 2.4 se Thanks beetlemania.Ordered them :-) | |
| Thiel cs2.4 upgrade to cs 2.4 se beetlemania,Yes the coil's are looking good and tight.How did the Mills resistors worked out for you? |