gregmacknass2
Responses from gregmacknass2
| Evansville,Indiana I live in carmel and would possibly be interested in getting together and comparing systems, just email me if you are interested. [email protected] Thanks, Greg | |
| Why is 2 Channel better than multi-channel? look at my system I just finally posted the pics tell me what you think about my 5 channel setup. | |
| How to get multichannel sound from a CD? As I and Kkurtis both stated Yamaha reciever is going to be your best bet for 5 channel stereo. He summed it up quite nicely. happy listening.Greg | |
| How to get multichannel sound from a CD? I am using 5 channel stereo using my Yamaha reciever's speaker outputs as the input on my amplifiers. I personally auditioned a couple of Dennon recievers at my local hi-fi store and was not that impressed with their sound in 5 channel stereo, plu... | |
| Anyone tried Magnepan 1.6's with rock music? I use maggies for rock and have found no shortcomings to speak of. I have 2 subs in my system and find myself never using them. I personally think that for the price, quality, sound, and reliability they are the audio world's best buy and if anyon... | |
| Need some juice --- High power amps I also run inefficent speakers 87 db carver's and 87 db magnepan's which are both 4 ohms. I have used many solid state amps and have found that Crest Audio amps are very powerful amps. I am running 2 sets of maggies in parallel (2.7 ohms) and they... | |
| Does anyone out there have a liquid system I have the awnser, LIQUID for all. My system is sonic euphoria and you would never believe my interconnects. I'm running two sets of magnepans MGIIIa's and MG-I improved's as my front L/R speakers. They are run in parallel at 2.7 ohms and powered ... | |
| McIntosh solid state amps, left on at all times ? I think that you should always turn your gear off when you are not using it no matter what kind of component it may be. In the case of having it warmed up just think of this your speakers not being warmed up when you go to use your warm amp you st... | |
| port shape - circle vs. thin slot, why? Hi there, I am also a velodyne owner and I do know the reason that they have a slot port. It is so that all of the air displacement is directed at the listener as opposed to tube ported designs that have the port at an opposing angle to the sub th... | |
| noise ..noise..noise.. this is to adress the statement that Gmood1 posted wattage of an amplifier does not directly affect how quiet an amplifier is but common sense tells you that if there is a slight noise (hum, buzz, ect.) at lower volume levels that when you increas... | |
| Need a Solid State Amp for my Montana EPS Crest Audio makes very powerful amps that sound very good at a more reasonable price Greg | |
| Am I shooting myself in the foot for convience? try a simple A/B comparison Try it with the switcher and without the switcher and you should be able to tell if the tech was lying to you Greg | |
| Newbie needs Help you can use the tape(monitor) selection on your reciever what you want to do is run a pair of RCA's from the output(record) to the input on the other reciever that you wish to use I hope this helps you on your way and if you have anymore questions... | |
| noise ..noise..noise.. try turning your amp power down slightly to compensate for the higher input power and if that doesn't work try disconnecting your cable for your tv because if your ground in your home is bad your system will ground itself through the cable. I had ... | |
| What do I add to make my system HT ? I ran into the same problem when putting my system together and I came up with a few solutions.1. Run a good reciever and use the speaker outputs as your pre-amp which will allow you to control what speakers are being utilized by what speaker mode... |