fiesta75

Responses from fiesta75

Class D Amplification Announcement
I’m sure it’s a wonderful amplifier. I’m going to stay with Vfet and class A until I die. Enjoy the journey!  
Batteries in my Audioquest Colorado RCA interconnects
I would replace the batteries! Those batteries are good for 8-10 years and you definitely don’t ever want them to leak. Happy listening.  
Storage of other speakers in the room, shorting them while not in use? Myth or true?
🙃 There is so much more to think about!  
Horizontal vs Vertical biamping
+1 bdp24 - excellent  If you don’t want the best like First Watt or Bryson, Ashley, TDM and DBX make some excellent crossovers for less money. You can always upgrade to First Watt or Bryson after you get your feet wet in bi-amping. Maybe even tri... 
Horizontal vs Vertical biamping
For me horizontal is the best but in order to realize the full benefits, an active crossover should be use. Vertical was only slightly better than using a single amplifier. Horizontal is a big improvement and you can use a much more powerful ampli... 
need more POWER
+1 for better power strip. The 20 amp line should have enough current for at least a 200 watt per channel amplifier.  
How does it work?
If you’re mechanical or electrical inclined, you might remove the cover to take a look. Might be something simple like a loose connection on or around the attenuator. You can find the service manual at hifi engine, https://www.hifiengine.com/hfe_d... 
How does it work?
My Onkyo didn’t have a mechanical potentiometer, it was all digital. If the knob on the receiver itself doesn’t visually rotate when turning the volume up via the remote, yours is the same.  
Helping friends/relatives with system purchases, your experience.
I gave up after a few tries. Everyone is so different, just let them listen.  
Carver Corp Vanished? Help!
🙃  
Need some help/guidance with Krell 700cx
Sorry to hear about your Dad, RIP!  
My MC 2205 Amplifier is smoking???
Get it serviced, don’t plug it in!  
Wilson Watt 3 Tiny Tots Tweeter issue
That tweeter reads too high, damaged. Doubt it’s the crossover, unsolder to verify.  
Harmon Kardon Citation 12 Amp with AR 9 LS Speakers: OHM's Question
No problem ohms wise as the amp is spec’s into 8 or 4 ohms. Not sure if 60 watts is enough if you want it loud.  
Using Adcom GFA-555s as monoblocks to power magnepan 3.3s in active biamp
I’m sure you will notice an improvement. I would try it, you have nothing to lose and you won’t damage the amplifier.