dmaddox77

Responses from dmaddox77

Help me tame my out of control bass
GIK Acoustic foam panels do nothing for under 100Hz.  I know, I have owned them.  You have the same frequency issues as I do.  120 is a harmonic of the 60 hz bump.  I put my money on the line and got some Diaphragmatic absorbers from Accoustic Fie... 
Acoustic treatment question: do you agree with Dennis Foley that $46k to $65k is required?
I just installed some 5 ACDA 10 and 8 ACDA 12 modules in my small room, about 2000 cubic ft. They were all custom made. Had to wait 9 months with all the shutdowns in California, but they did arrive.The low end, below 100hz, is dramatically contro... 
Acoustic treatment question: do you agree with Dennis Foley that $46k to $65k is required?
I believe his low end absorption 30hz to 100 hz is second to none.  I prefer GIK for 100hz on up for the price.  I will have spent a total of $7,500 on absorption in my small room.  Dennis actually said diffusion wouldn't work in my HT/Music room.... 
What are you streaming tonight?
Lake Street Dive 
Tekton Design Moab
MillerCarbon,what is the distance from the top of the cabinet to the bottom of the MTM array? 
Tekton Design Moab
MC, understood about the DBA.  My room is used for Home theater and a listening room.  Currently have 2 B&W ASW610.  One in the front Corner and one in the opposite rear corner.  4-10 Tectonic wouldn’t work in the front because of the movie sc... 
Tekton Design Moab
mc, I thought you liked REL subwoofers?  I am always open to suggestions. 
Tekton Design Moab
MC, what subwoofers do you recommend to pair with the Moabs?  Would the REL S812 work well?  Any other comparable music quality speakers would be abliged. 
Tekton speakers with Ribbon / AMT ??
Whacky,I look forward to your comparison of the DI to you new Encore, and excited for you.I am looking to upgrade my Movie Theater/Listening Room with either the DI or the MOAB.  Millercarbon enlightened me, with his thread, to consider at least t... 
If Audiophiles care about sound, then why so few threads on acoustics
Heaudio123, I am afraid it will be too dampened as well.  I will put some scatter plates on the rear wall and rear sides.I love good quality sound, so my system will always evolve.  New and better speakers, subwoofers, and amplification will incre... 
If Audiophiles care about sound, then why so few threads on acoustics
heaudio123, sorry should have been Surround Left and Surround R.  At ear level beside sitting position. 
If Audiophiles care about sound, then why so few threads on acoustics
I am dealing with this now. I have a dedicated theater room.  B&W CM8 s2 front LR and C, 2 B&W ASW 610, B&W DS3 in SR LR, B&W CWM663 S LR, B&W CCM663 in the ceiling.  Denon AVR X5200W.  Room is basically 200sqft and rectangular...