audiogalore

Responses from audiogalore

Sonus Faber Venere 2.5 amplifier Recommendation
Yes 250 watts pure solid state Class A on Lows and 130 Watts tube power on highs. Best I've heard to date on my system. I also have a Prina Luna Dialogue Premium pre-amp driving a analog active balance crossover making a perfect bi-amp setup! As f... 
Sonus Faber Venere 2.5 amplifier Recommendation
I have a pair of Sonus Fabers Venere 2.5 and found similiar issues controlling bass roll off. I have them a thick carpet laying on a concrete slab foundation. I corrected issues by going to my local granite stone company and had them cut and polis... 
spatial audio M3 or M4 as an upgrade
Thank you for the detail analysis on the Spatial M4. I presently have a CS 3.0 MkII setup and driving the same with a Woo WA5 Set Class 300b 8W high current amp. that is the best I have heard from the speakers and personally have tried many SS amp... 
Emerald Physics amp swap options
I have the CS 3.0 MKII and tried many difference SS. Ended up with my Woo WA5 Class A 300B setup and its like a match to heaven! 
Experience with AMR DP-777
I see where this can become a major issue and AMR need to careful not to let issue go on much longer or they definitely will lose market share! 
Experience with AMR DP-777
Thank you yes I have been there too. 
Experience with AMR DP-777
This is reply I received from the AMR group in England:"We have ran this past our Technical Department, please find their comments:"It could be the relay switching for muting. Either the relays or the control-IC get too hot. Does the customer ha... 
Experience with AMR DP-777
Hi George:Thank you for the info Best Harold 
Experience with AMR DP-777
I have a DP-777SE and been experiencing no sound whenever it is ran for a period of time. In order to reset sound I need to power down and let it sit for an hour or so after power on is set sound is restored! Have anybody experience such an issue?  
All of a sudden getting a hum in my system?
How weird I have the same problem. I am using a ZU/DL103 with a modified RB250 and have a hum problem when arm is grounded to the chassis ground of the Manley Chinook. However when i disconnect the ground the hum goes away but have a occasional lo... 
Balanced vs Unbalanced?
Very well put Al....PRICE!!! and no interferes from shared chassis ground and other component signal returns. 
Balanced vs Unbalanced?
The pro and cons:Balanced circuits only has an advantage if used as intended.If the black box is truly balanced in designed circuitry, from source through final speaker out, then yes it should sound sonically quieter and better matched.Cable desig... 
Proceed PAV/PDSD Communication Cable
Hi Jeff9114:At Radio Shack. 
Proceed PAV/PDSD Communication Cable
Hi Girish:I have a PAV/PDSD and had the same problem, it ended up to be the RJ-11 cable.Another thing that you might want to try is unplugging 110VAC on both units and then replugging.Enjoy music! 
Phono preamp gain setting
Sure if you have a high gain switch that is 54db on the phono pre-amp then this should be your fix!You are already maxed out on 47k ohms and no need to change resistance loading.Enjoy music!