2. analog
  3. 1391196624

To adjust ride level of springs on SOTA turntable

I have an older SOTA and the sub-chassis rides about 3/16" below the outer cabinet. I noticed there's screws that I assume can be adjusted to tighten or loosen the springs, is this the way to change the height of the sub-chassis or are the springs just old?
128x128digepix
elevick
2,636 posts
 
Do you want the repair/assembly instructions?
email me emfoods at yahoo dot com
audiogon won't allow me to post my actual email
stringreen's avatar
stringreen
6,368 posts
 
First, get new springs
schipo
1,268 posts
 
your correct in your thinking about the four hex screws. You can soften or harden the suspension on the SOTA table by adjusting it by turning the hex screws. Turn them slowly until suspension has a proper feel or bounce using a spirit level. I'm sure there is much info on this table with a more comprehensive instruct tuning the unit to an optimum performance level. The best its a good table.
More to discover