Lead shot questions


I have a few questions about lead shot as mass loading for speakers.

Is the shot placed loose internally? Bagged? I really dont like the idea of stacking bags on top of the speaker.

What do you do with the acoustic-fil or liners?

Any pointers on getting the shot inside the speaker? Woofer removal, or input terminal removal, or just a common sense lowest point available?

Lastly, with my B & W CDM-9NTs, do you think it would be a worthwhile endeavor?

Thanks in advance.
distortion
Post removed 
Very good points and ones that I had not thought of at all.

I saw an add here a few days ago for very small stainless steel discs. I suppose the steel wouldn't create dust like lead. At the very least, it wouldn't be as toxic.

If I remember correctly steel weighs approximately 4oz per cubic inch. Discs would be less, since there is some air space, say 20% less. Hmmm, 100 cubic inches for 20Lbs as a guesstimate. That's a fair amount of volume, 4 to 5 percent of my speakers internal volume, certainly enough to have some acoustic effect.

Nonetheless my curiosity is still piqued.
UNless I miss my guess, mass loading usually involves the stands, or placing bags of the shot or whatever on top of the device, not inside. As for steel, its magnetic and so I don't think it should go inside a speaker with a magnet. As for lead, it highly toxic and I sure wouldn't want it loose anywhere in my home. Bagged only, I say. YMMV.
Elizabeth is right dust would be dangerous to young childrens nervous systems. It may also make you snap for a moment in a rage of anger, & who knows?

First pick up a pair of Sound Anchor Cradle style bases for your Cdm-9nt's, then going from a Bryston 4b-st, to 7b-st mono's will really open up the 9's BIG TIME!!!

The Cdm-9's are fine as is no need to mod them, they just need a major amount of juice to really open them up. I used to own a pair w/ a 4b-st, & 2 Rel Strata III's. Once the 7b-st's where in the system I never felt the need to re-connected the Rel's.

Good Luck!
Audiobugged, LOL. You know me well. I certainly dont need anymore rages. The Sound Anchors is a great idea, I am going to look into it immediately. I should have a 4B-SST next week so the amp is going to improve some, hopefully.

Swampwalker, I didnt even think about the steel and the magnets, a potentially sticky situation! I am a diver, and as an experiment I could place my soft bagged lead weights on top. I only have a pair of 5s and 4s (salt/fresh). So each speaker would have 9Lbs on top. Not a lot, but maybe enought to see if this warrants further consideration.

Thanks so much. More thoughts are certainly welcome.