2. analog
  3. 1269014542

Setting VPI JMW 10.5i

Hi guys,

I have gotten my VPI classic almost set.
The only thing is that I am afraid to regulate the tonearm.
I have Mint LP for the best Tractor and the KAB strobe disk as jig to properly set the TT.
It looks really delicate with that sharp niddle stickin up and I am afraid with the pick up on to regulate azimuth and adjust the weight because the tonearm wabbles in every direction.
Is there any step by step description on how to set this Tonearm? The manual is a bit poor in this sense.

Thank you very much.
stefanoo
stringreen's avatar
stringreen
6,368 posts
 
When you adjust your tonearm, simply make sure that you either hold it, or that the cueing is in the up position. You then place it on the Mint to see if your adjustment is perfect. I know it feels unstable, but the tonearm is excellent, and you will get used to it.
narrod
1,064 posts
 
The manual could be better. Once you get the hang of setting the various parameters, it is pretty easy. Take your time and you'll get it.

Wendell
chazzbo
1,007 posts
 
Yeah it's a uni-pivot.Just do what is suggested before don't be afraid of the wobbles even after you get it et up.Seems disconcerting when compared to non-uni pivot but once lowered and into groove it tracks well and won't be a concern.Call VPI if it's that worrisome and they will walk you through the initial set up.
Chazz
hiendmuse
257 posts
 
Make sure you secure the platter with some tape or an eraser or both to keep it from moving, platter must be totally blocked from any movement.
More to discover