Can you use the same phone stage w 2 turntables

First thing:
Fantastic phono stage - I'm listening to the Chicago "Live @ Carnagie Hall" 4 LP set now!
You can use 2 or more with each input.
I have A VAC Ren. Sig. Mk. II with phono & only use mc cartridges.
I have 2 arms on my Verdier La Platin & use 2 armwands for my 12" Morch DP-6 along with a 12" Da Vinci Grandezza.
I also use a Oracle Anniversary with Breuer Dynamic arm on my second table.
It's this easy:
Just switch the phono cables on either mc or mm input & use the switch on the back of the pre amp (as per Swampwalker) for the correct input.
You may have to open the pre amp to switch cartridge loadings.
Will soon put my new modded Rhea into play & can use 5+ cartridge/arm combinations (including mono) without moving from my chair - except to cue (play/stop).
You can also use a step up transformer & use the mm input for another mc cartridge.

if it has two separate inputs and switch between them than you can use it.

otherwise you'll have a problem of "stand-by" turntable that will add hum and noise.

I like the advice so far, get a phonostage that accommodates more than one input. What is NOT recommended is to use a "Y" cable or similar.

jh