Linn LP 12 Problem.......


Just bought one and got to play one record.......that's it.
Anyway the soft touch power button would not shut off so i unplugged it,plugged it back in and still stuck on.......unplugged it again and left it.
Anyway later in the day i went to plug it in again and i have no power, press the button and nothing.
Took the bottom off and it seems like it could be a little loose at the circuit board, the ribbon looks ok.
I got this on trade for an amp, now i have no amp and a tt that does not work, great!

x1884
If your Linn's power supply is the Valhalla model, a cap failure sounds familiar. Both my Linn dealer's Valhalla boards crapped out during the speaker demo he was giving me, for the same reason--a capacitor failure.
I had an Linn LP12/Valhalla, I would suggest that you take it to a Linn Dealer/TT specialist because that Vahalla board has high Voltage and if you don't know what you're doing and don't know the general saftey rules for working on high voltage gear then I would not mess with it, one small slip of your hand and you can be seriously injured or even killed. It maybe something simple, Was the speed varying? because that's usually the first sign that the Valhalla is going bad otherwise it may be the switch itself or a bad connection. If its the Valhalla board this may set you back about $500-$700 for a new Valhalla but if the guy is good he may be able to repair the bad one with new caps for cheap because that's what usually the problem when the boards go bad due to having power supplied at all times even when the switch/power is off. I hope this helps.

Steve
They don't make Valhalla power suplies any more, and haven't for around 10 years. Please don't buy a replacement Valhalla at $500 to $700. I am sure they can be had for around half to a third of this. In fact if you are having trouble finding one at a reasonable cost, email me and I'll see if I can help. No promises, but I'm willing to try. (My dealer may still have the one he took out of my table last year when I went with the Lingo).

But if you have to spend anything close to $500, then pony up the extra cash for a Lingo, which will really make you table SOOOO much better sounding. If you end up with a Lingo, you may be ultimately very glad you Valhalla powersupply failed.
Thanks very much guys, how much does a lingo cost and where can you get one?
Is this old or current?
I just bought the table and got 2 records to play and then the problem.......just my luck.
I hope it is a simple fix, i have no intention on spending over a hundred bucks for repairs of which the local Linn dealer said it would most likely cost.
How much better sounding is the Lingo option? well worht the money?