2. tech-talk
  3. 174440-117200

Synergistic Orange and purple fuses popping

 

Synergistic Orange and purple fuses popping

I recently upgraded all my gear with the new Synergistic orange and purple fuses (15 in all) What a difference! My Cary SLP-05 preamp with 8 Vintage Tungsten  6SN7 tubes is having problems with the Orange and Purple Synergistic fuses in the power supply. For some reason when I turn on the preamp amp after warming up the powersupply unit, the 2 power supply fuses pop. So far Synergistic has been gracious and replaced them twice now. I increased  the 2 large slow blow fuses from 1amp to 2amps after asking Cary audio what I should try. I also spoke with Synergistic and they agreed their fuses are sensitive but all the stock fuses I ever used have worked flawlessly. Any body out there with any similar problems and maybe a solution? Any upgraded hi-fi fuses that may be less prone to popping? I think it may be due to a current rush (tube related) when I go from off to on. Help!

Thanks

gregtheis
jerryg123's avatar
jerryg123
3,429 posts
 

@russ69 worked for what addiction?…

gregtheis OP
21 posts
 

Thanks Ozzy for some helpful tips. I did increase the amps to 2 from 1 on the SR slow blows and they still popped. I 'm waiting to hear back from Cary to see if they condone a higher fuse rating. Not sure what it will take and if I'm pushing things to far. They sure do sound good in all my other componenets. I wonder why the naysayers can't hear any more. Best money snake oil can buy imho.

Ha

goose
668 posts
 

I blew a blue in my preamp after a few months.  I got an orange and blew it in a new preamp from the same manufacture in a few months.  The orange was two increases over the stock.  

I put back in a common ceramic at the rated value and it has been fine ever since.  My opinion is that the fuses are not stable but lots of people like them, I don't.

tomic601's avatar
tomic601
12,752 posts
 

Ted ?

Ag insider logo xs@2x
oldhvymec
5,101 posts
 

I've had 5 different Cary tube products they all used the 560uf filter caps in the power supply. Mine all did the same thing they were all older units too. They would start running hotter and I had to be very careful flipping from standby to on. They would pop a fuses. I'd change the 2 or 4 560uf caps and the problem would go away. They will leak oil too. LOL I thought I had an old Harley the first time one took a dump. Left a puddle of oil. :-)

I was using ACME at the time in my Macs, Carys, VTL, Threshold. I was given SR to try. I wound up paying for blue and orange fuses. 10 or so..

Regards

More to discover