Two Cables From One?


So I can only find Shunyata v14 in a 6 ft lengths. I’m guessing they do that to simplify and reduce cost. Anyways, I don’t need anything longer than 3ft and find it less than ideal to have to deal with extra length especially in thicker cables. I really like power cables to be close to the exact length needed. I realized why not cut one in half and buy a couple connectors and then two for the price of one pretty much.

I wanted to ask and make sure that I’m not overlooking some sort of issue. Also Looking for suggestions on what connectors to use. I understand that the voicing of the cable will likely change slightly from using different connectors, but it seems worth the risk to me. I don’t plan to cut off and replace the factory connections. I know they’ll look a little Frankenstein but I’m not worried about that since I’ll never see them. Budget would be about 50$ for a pair of connectors. I don’t think it makes sense to spend more really. Also I would think that the quality at that price point should be similar to what the factory is using. Looking around I didn’t come up with much. Wattgate is the one I keep coming across with a few options in my budget. Also Parts Connexion has there house brand that at least look more impressive for 60$ a pair.

I wouldn’t think I’m the first person to have this idea, and look forward to all your responses.
brylandgoodman
I was under the impression that the jacket would hold the spiral?
Depends how you handle the cables when unplugging and whether the cable clamp (i.e. integrated into the plug) is holding onto the sleeve securely.

Some audiophiles can be a bit "ham-fisted" and even though they know NOT to pull on the actual cable they do so anyway  and the cable could unravel.

The cable as finished by the manufacturer will not unravel because of the molded plugs at both ends.

Also - the cable clamps on the available plugs vary widely and so does their ability to clamp a cable successfully

I like the Silver plated copper line of Sonarquest plugs (Ebay) - the IEC plugs grip like a vice.

Regards - Steve

I hate to discourage DYI projects because good cables can be made by hand. However, I have to agree with the general sentiment here - I would not modify an existing cable product in this manner, and the length may be an important variable in why this power cable sounds good. 
Modifying the cable could compromise the resale value. I would suggest reaching out to the manufacturer and inquire as to whether they would provide this service for you.
I think your best bet is to start from scratch with an all DIY cable building project.  There are plenty of sources for materials and construction methods out there.  Once you've created your perfect length set, no one can tell you it isn't great because it will be unique.  Have fun!