2. cables
  3. 166392-140582

FI-28 (R) IEC Connector Bad Buy?

Hi all, I have a question again, regarding the FI-28 Connector Rhodium variant. My system is a hybrid tube system from Unison Resarch with green Sylvania NOS tubes and the new Dali Opticon MK2 as speakers which are also already Burned in, as tuning I have a fine fuse from Alan Maher Fourier Audiophile Fuse. Until now I had an enormously good power cord on it that was already equipped with Furutech F11 Gold.

It sounded really everything already excellent but as they say, it always goes better. So I was once again faced with a decision, Furutech FI 28 gold or rhodium?

I must admit earlier I always wanted to have only an analytical system ... but since I have this F11 Gold power cord, I feel the music so extreme that it makes me addicted.

Important to mention I come from Switzerland, which is why my Schuko plug is not a real Schuko respectively consists of gold, there are only about 2 high-end plugs the market is really small there and this gold plug but does a very good job.

Since I got carried away by the people who prefer the rhodium, I decided to go that way.

I am aware that it will take quite a while until the new plugs are in place...but I wonder at the moment if I have not made a big mistake.

The music, unlike the F11, plays more spatial and tactful and analytical but the treble is enormous and almost tiring. The bass has gained in power is even more precise but still everything sounds a bit artificial ... In total, I have the FI 28 Connector now played 20 hours.
Of course I know that with time everything will stabilize a bit... but I wonder if this is possibly also the character of rhodium.
Or can it be that rhodium plug and gold Schuko not fit together?

What do you think, should I save the time and directly get the FI-28 Gold or should I get
give the Rhodium a chance?


audiophil2020
Post removed 
Post removed 
audiophil2020 OP
13 posts
 
Well as I said, I had the F11 gold with the current Schuko plug which are also gold. The plugs were completely burned in and it sounded heavenly but, you noticed that there is still something going up.
Thus, the FI-28 should actually play in another league. Sure I could also buy the FI-50 but that’s a lot of money because I expect then also enormously more power but at the moment this is too expensive for me.

I think I had read in a thread that it depends on whether with what you connect the cable, respectively front and rear should be rhodium. With me is now front rhodium back gold ... because unfortunately there are not many possibilities in Switzerland for a Schuko plug in rhodium ... except Viborg I think ... otherwise there is only the possibility of a fixed adapter to the Schuko ..but the question is whether then the Performence decreases because it is an intermediate piece. Have me also already considered the matching Schuko Furutech FI e38R to buy.

But as the other forum members have mentioned I should wait a while before I make my decision.


petg60
1,486 posts
 
I believe in good quality plugs but matching different materials at iec and schuko is a hard way though it may prove a good thing like having a gold and plain copper at ends.Why don't you try rhodium at both ends with 28/38? Sure they will be lacking compared to 50NCF but performance would be more uniform.
audiophil2020 OP
13 posts
 
Now the 38R I would still have to get me. As already mentioned, I would then have to use a fixed adapter, this can then no longer be removed. This is how it would look https://cdn.competec.ch/images2/7/8/2/58496287/58496287_xxl3.jpg
What do you think it would greatly affect the sound? this is actually only a kind of transition from EU to CH plug.

On the other hand I still have a Viborg Rhodium plug with CH connector. Unfortunately I do not know Viborg so well, is it any good? And what is the break-in time there?

More to discover