Is this Cartridge Alignment good?

Roger, There are two parameters you have to adjust. They are overhang, which you adjust by sliding the cartridge back and forth in the slots in the head shell and offset angle which you adjust by twisting the cartridge in the horizontal plane. Using a combination of the two going back and forth between the two points you should be able to get it right. Defeat the anti skate and it will be easier to keep the stylus right on the cross. In pictures A the stylus is probably not on the target cross. In picture B you need to push the cartridge a little farther out (increase overhang) and give it a little twist counter clock wise. Then check it at point A again.

There is a point for stylus tip, but your stylus is not there, the rest is irrelevant. Make sure the stylus tip (diamond) is exactly on point, then you can twist your cartridge. You did everything wrong.

The cartridge looks tweaked in both instances make sure everything is aligned a bit better and i believe you will hit both points accurately.

Mijo is on the right track.  Properly aligned, a cartridge will be perfectly aligned at two points on its arc across the record.  Simple protractors give you those two points.  If it only aligns at one, more tweaking is required.  If you have the means, I highly recommend a more advanced protractor that uses the tonearm horizontal pivot as a reference, like the Dennesen Soundtractor (if you can find one.)  Makes quick work of overhang and offset.