2. digital
  3. 165198-149317

Pimping your router

1. Use a wired router only
2. If wireless router is needed, separate router for wifi
3. only streamer, NOTHING ELSE connected 
4. use LPS to feed router
5. use shortest possible quality cable to streamer
6. use Acoustic Revive RLT-1 filter on spare router or streamer port
7. wrap router and LPS in EMI/RFI shielding material
8. use EMO EN70-HD filter near streamer for ethernet connection
9. use quality shielded cable between router and internet access point

All of these will individually improve your streaming SQ, in aggregate the effect is significant
Enjoy the music
antigrunge2
sgreg1
612 posts
 
Or you can contact Small Green Computer Co. and they can get you all set up with a fiber optic solution. You can run fiber for miles with no signal loss.
Hope the solution described above also included a fire sprinkler system. Can only imagine all the heat generated from pimping.
audioguy85's avatar
audioguy85
1,989 posts
 
Use a turntable, play records, avoid all above...😁
lalitk's avatar
lalitk
5,055 posts
 
@audioguy85

Yeah, like analog is plug n play 😂. By your own admission on another thread, “Analog is a very involving listen. However, it does require work, but I like the challenge.”

A good playback system regardless of the format requires work.
musicfan2349's avatar
musicfan2349
203 posts
 
Yeah turns out proper shielding is a thing. I wrote about improving my streaming experience but hadn't tested the effects on the rest of the system:https://forum.audiogon.com/discussions/bluesound-node2i-and-wifi-frustrations-mesh
Turns out having the mesh node in the stereo cabinet is a bad idea with regards to my C-J Premier 6 pre-preamp... It's VERY sensitive to EMI. So I either need to move the mesh node across the living room and run Cat5 or shut down the node to play vinyl. *facepalm*
Happy listening.
lalitk's avatar
lalitk
5,055 posts
 
@musicfan2349,

You can certainly turn off the node during vinyl playback or alternatively place the ERS on top or around mesh. I am using a small cut-out on top of my Apple router. 
https://www.stillpoints.us/index.php/product/ers
More to discover