RME ADI-2 direct to amp

I've been using my RME ADI 2 Pro as a preamp direct to power amp (tube, soild state, and class D) for a few years, as well as a headphone amp, without issue.

I’ve been using my RME ADI 2 Pro as a preamp direct to power amp (tube, soild state, and class D) for a few years, as well as a headphone amp, without issue.

This should never have been bought up in the first place, the REM ADI 2 has 100ohm output impedance, with enough voltage to drive ANY amp into clipping, balanced and SE. Shows how things snowball without any reason to.

Cheers George

Hmm. I dont see how it's snowballed. I asked a question about those who have used this particular DAC direct to power amp? 

What I mean is one says it, then another and another.
It’s an unwritten law the output to input ratio should be 1:10 or better eg: 1:100

Not many look at the specs to see if the ratio of what the RME output impedance is (100ohm), and if it 10 x less or more than the input impedance of the power amp it sees, in this case the Rogue at 100kohm! so 1000 x less, so absolutely problem at all.

Cheers George

I get it that it will work. When I tried it 10 years ago with my Wyred it worked as well, just sounded hard albeit more detailed. I can infer from milked's post he liked it since he has used it that way for several years. 

Things that should be technically superior do not always sound that way to my ears.