Atacama in the UK makes nice stands in an abundance of sizes. I've used them for years....
How much overhang is ok between a speaker base and the stand top plate?
This thread extends another I posted about "mass loading" stands.
As I mentioned in those threads, I’m choosing speaker stands for my Salk SS 6M speakers. They measure:
20” H x 9 1/8” W x 14 5/16” D
There are many options for speakers stands, but the choice is complicated by the size of the speaker’s width and depth.
Many stands feature a top plate that is 6" x 6" or 6" x 8" or 7" x 7" etc.
On *any* of these top plates, my speaker would hang off the sides and front/back by at at least 2-3 inches.
For example, I’m considering Target stands but am not sure if it’s worth spending good $$ on a stand if there is this amount of overhang.
Seeking opinions about the "overhang" issue between speaker base and stand top plate. How important is this for the sound? How much overhang is too much?
And if it was necessary to have a top plate made locally to go along with the stand, would I just affix it myself? Have it welded on? I didn’t want this to get so complicated.
Thanks for your opinions.
As I mentioned in those threads, I’m choosing speaker stands for my Salk SS 6M speakers. They measure:
20” H x 9 1/8” W x 14 5/16” D
There are many options for speakers stands, but the choice is complicated by the size of the speaker’s width and depth.
Many stands feature a top plate that is 6" x 6" or 6" x 8" or 7" x 7" etc.
On *any* of these top plates, my speaker would hang off the sides and front/back by at at least 2-3 inches.
For example, I’m considering Target stands but am not sure if it’s worth spending good $$ on a stand if there is this amount of overhang.
Seeking opinions about the "overhang" issue between speaker base and stand top plate. How important is this for the sound? How much overhang is too much?
And if it was necessary to have a top plate made locally to go along with the stand, would I just affix it myself? Have it welded on? I didn’t want this to get so complicated.
Thanks for your opinions.
- ...
- 44 posts total
I use Audioquest Sorbothane mats to adhere my 1 cu. ft. speakers to Target HR50 stands (with stance plates). These seem to serve well as vibration blockers, metal ringing dampers, and hold the speakers firmly from falling if accidentally bumped. They also don't materially change the height of the speaker, and best of all...don't cost much ($49.00 @ AA). On the overhang question, don't be overly concerned as long as you have a rigid stand and a secure attachment to the speaker, either by adhesive or by screwing up through from the bottom. Don't want to mar the veneer on the bottom...try the sorbothane... |
These Sanus NF 18B might be a good fit for those speakers! https://www.bhphotovideo.com/c/product/306882-REG/Sanus_NF18B_NF18B_Natural_Foundations_18.html/specs?ap=y&smp=y&msclkid=5e26e2ce01eb1154d3a7bda015a2ac2e |
- 44 posts total