Cleaning tube pins

Silver polish lightly followed by rinse with isopropyl alcohol, pins and tube bottom.

For those folks who are suggesting isopropyl alcohol, I presume this is safe to do on a tube pin that can get hot...anyone concerned about that?
Presumably the alcohol evaporates enough to not be an issue?

Alcohol evaporates 100%, leaves no residue. Use 91% or 99% isopropyl alcohol. Wait til completely dry before reinserting tubes. 

@OP,
Been doing it for at least twenty years.
Alcohol quickly evaporates. What you are wiping dry is any water content the alcohol didn’t evaporate with it.

.

I wiped down my gold plated pins with some 91% isopropyl alcohol tonight. Seemed to clean the pins well enough, we shall see if that also cleans up the sound a little.