My Long List of Amplifiers and My Personal Review of Each!


So I have been in a long journey looking to find the best amplifiers for my martin logan montis. As you know, the match between an amplifier and speakers has to be a good "marriage" and needs to be blend exquisitely. Right now, I think I might have found the best sounding amplifier for martin logan. I have gone through approximately 34-36 amplifiers in the past 12 months. Some of these are:

Bryston ST, SST, SST2 series
NAD M25
PARASOUND HALO
PARASOUND CLASSIC
KRELL TAS
KRELL KAV 500
KRELL CHORUS
ROTEL RMB 1095
CLASSE CT 5300
CLASSE CA 2200
CLASSE CA 5200
MCINTOSH MC 205
CARY AUDIO CINEMA 7
OUTLAW AUDIO 755
LEXICON RX7
PASS LABS XA 30.8
BUTLER AUDIO 5150
ATI SIGNATURE SERIES 6005

With all that said, the amplifiers I mentioned above are the ones that in my opinion are worth mentioning. To make a long story short, there is NO 5 CHANNEL POWER AMP that sounds as good as a 3ch and 2ch amplifier combination. i have done both experiments and the truth is that YOU DO lose details and more channel separation,etc when you select a 5 channel power amplifier of any manufacturer.
My recollection of what each amp sounded like is as follows:

ATI SIGNATURE SERIES 6005 (great power and amazing soundstage. Very low noise floor, BUT this amplifiers NEEDS TO BE cranked up in order to fully enjoy it. If you like listening at low volume levels or somewhat moderate, you are wasting your time here. This amp won’t sound any different than many other brands out there at this volume. The bass is great, good highs although they are a bit bright for my taste)

NAD M25 (very smooth, powerful, but somewhat thin sounding as far as bass goes)
Bryston sst2(detailed, good soundstage, good power, but can be a little forward with certain speakers which could make them ear fatiguing at loud volumes)

Krell (fast sounding, nice bass attack, nice highs, but some detail does get lost with certain speakers)

rotel (good amp for the money, but too bright in my opinion)

cary audio (good sound overall, very musical, but it didn’t have enough oomph)

parasound halo (good detail, great bass, but it still holds back some background detail that i can hear in others)

lexicon (very laid back and smooth. huge power, but if you like more detail or crisper highs, this amp will disappoint you)

McIntosh mc205 (probably the worst multichannel amp given its price point. it was too thin sounding, had detail but lacked bass.

butler audio (good amplifier. very warm and smooth sweet sounding. i think for the money, this is a better amp than the parasound a51)

pass labs (very VERY musical with excellent bass control. You can listen to this for hours and hours without getting ear fatigue. however, it DOES NOT do well in home theater applications if all you have is a 2 channel set up for movies. The midrange gets somewhat "muddy" or very weak sounding that you find yourself trying to turn it up.

classe audio (best amplifier for multi channel applications. i simply COULDNT FIND a better multi channel amplifier PERIOD. IT has amazing smoothness, amazing power and good bass control although i would say krell has much better bass control)

Update: The reviews above were done in January 2015. Below is my newest update as of October 2016:



PS AUDIO BHK 300 MONOBLOCKS: Amazing amps. Tons of detail and really amazing midrange. the bass is amazing too, but the one thing i will say is that those of you with speakers efficiency of 87db and below you will not have all the "loudness" that you may want from time to time. These amps go into protection mode when using a speaker such as the Salon, but only at very loud levels. Maybe 97db and above. If you don’t listen to extreme crazy levels, these amps will please you in every way.

Plinius Odeon 7 channel amp: This is THE BEST multichannel amp i have ever owned. Far , but FAR SUPERIOR to any other multichannel amp i have owned. In my opinion it destroyed all of the multichannel amps i mentioned above and below. The Odeon is an amp that is in a different tier group and it is in a league of its own. Amazing bass, treble and it made my center channel sound more articulate than ever before. The voices where never scrambled with the action scenes. It just separated everything very nicely.

Theta Dreadnaught D: Good detailed amp. Looks very elegant, has a pleasant sound, but i found it a tad too bright for my taste. I thought it was also somewhat "thin" sounding lacking body to the music. could be that it is because it is class d?

Krell Duo 300: Good amp. Nice and detailed with enough power to handle most speakers out there. I found that it does have a very nice "3d" sound through my electrostatics. Nothing to fault here on this amp.
Mark Levinson 532H: Great 2 channel amp. Lots of detail, amazing midrange which is what Mark Levinson is known for. It sounds very holographic and will please those of you looking for more detail and a better midrange. As far as bass, it is there, but it is not going to give you the slam of a pass labs 350.5 or JC1s for example. It is great for those that appreciate classical music, instrumental, etc, but not those of you who love tons of deep bass.

 It is articulate sounding too
Krell 7200: Plenty of detail and enough power for most people. i found that my rear speakers contained more information after installed this amp. One thing that i hated is that you must use xlr cables with this amp or else you lose most of its sound performance when using RCA’s.

Krell 402e: Great amp. Very powerful and will handle any speaker you wish. Power is incredible and with great detail. That said, i didn’t get all the bass that most reviewers mentioned. I thought it was "ok" in regards to bass. It was there, but it didn’t slam me to my listening chair.

Bryston 4B3: Good amp with a complete sound. I think this amp is more laid back than the SST2 version. I think those of you who found the SST2 version of this amp a little too forward with your speakers will definitely benefit from this amp’s warmth. Bryston has gone towards the "warm" side in my opinion with their new SST3 series. As always, they are built like tanks. I wouldn’t call this amp tube-like, but rather closer to what the classe audio delta 2 series sound like which is on the warm side of things.

Parasound JC1s: Good powerful amps. Amazing low end punch (far superior bass than the 402e). This amp is the amp that i consider complete from top to bottom in regards to sound. Nothing is lacking other than perhaps a nicer chassis. Parasound needs to rework their external appearance when they introduce new amps. This amp would sell much more if it had a revised external appearance because the sound is a great bang for the money. It made my 800 Nautilus scream and slam. Again, amazing low end punch.

Simaudio W7: Good detailed amp. This amp reminds me a lot of the Mark Levinson 532h. Great detail and very articulate. I think this amp will go well with bookshelves that are ported in order to compensate for what it lacks when it comes to the bass. That doesn’t mean it has no bass, but when it is no Parasound JC1 either.
Pass labs 350.5: Wow, where do i begin? maybe my first time around with the xa30.8 wasn’t as special as it was with this monster 350.5. It is just SPECTACULAR sounding with my electrostatics. The bass was THE BEST BASS i have ever heard from ANY amp period. The only amp that comes close would be the jC1s. It made me check my settings to make sure the bass was not boosted and kept making my jaw drop each time i heard it. It totally destroyed the krell 402e in every regard. The krell sounded too "flat" when compared to this amp. This amp had amazing mirange with great detail up top. In my opinion, this amp is the best bang for the money. i loved this amp so much that i ended up buying the amp that follows below.

Pass labs 250.8: What can i say here. This is THE BEST STEREO AMP i have ever heard. This amp destroys all the amps i have listed above today to include the pass labs 350.5. It is a refined 350.5 amp. It has more 3d sound which is something the 350.5 lacked. It has a level of detail that i really have never experienced before and the bass was amazing as well. I really thought it was the most complete power amplifier i have ever heard HANDS DOWN. To me, this is a benchmark of an amplifier. This is the amp that others should be judged by. NOTHING is lacking and right now it is the #1 amplifier that i have ever owned.

My current amps are Mcintosh MC601s: i decided to give these 601s a try and they don’t disappoint. They have great detail, HUGE soundstage, MASSIVE power and great midrange/highs. The bass is great, but it is no pass labs 250.8 or 350.5. As far as looks, these are the best looking amps i have ever owned. No contest there. i gotta be honest with you all, i never bought mcintosh monos before because i wasn’t really "wowed" by the mc452, but it could have been also because at that time i was using a processor as a preamp which i no longer do. Today, i own the Mcintosh C1100 2 chassis tube preamp which sounds unbelievable. All the amps i just described above have been amps that i auditioned with the C1100 as a preamp. The MC601s sound great without a doubt, but i will say that if you are looking for THE BEST sound for the money, these would not be it. However, Mcintosh remains UNMATCHED when it comes to looks and also resale value. Every other amp above depreciates much faster than Mcintosh.

That said, my future purchase (when i can find a steal of a deal) will be the Pass labs 350.8. I am tempted to make a preliminary statement which is that i feel this amp could be THE BEST stereo amp under 30k dollars. Again, i will be able to say more and confirm once i own it. I hope this update can help you all in your buying decisions!


128x128jays_audio_lab
I auditioned and purchased the Synergistic Research Power Cell SRX with their Galileo power cord yesterday. I read a review online that pitched this against the PSA product and a different brand that uses magnetics. I feel most people over state the differences they hear. I have been a sceptic about Expensive cords,and maybe I still am, only had time to listen to this one product. Once we switched a couple of time, I noticed a background hiss between notes, that was appear to because of its total absence with the power cell running. Obviously this his wasn’t huge since I had not noticed it before, but we were listening at fairly low levels compared to my normal, so it’s possible would have been more noticeable if louder. I also noticed a bit more impact and punch I. The highs and lows, and likely through the whole range if I had more time to listen. At the low volume levels, the fact that it was apparent got my interest. I did end up purchasing the unit, and I suppose I may be headed down the road of high end cables, interconnects etc, after I find time to audition those. Some sources, Audioholics is the main one I can think of, feel it’s all snake oil. Again, I was skeptical to say the least, and truly expected to not hear a difference as I did not many 15 years ago when I first started on the high end journey. I also just purchased the PSA P20 thinking that even if there was no sound improve the, I would have great surge protection and will experiment with that in line before and after the Power Cell at the outlet. I wonder if Jay has tried this product and how he felt it worked for him if so. 
I have tried the P20 from ps audio and after i tried the Shunyata Denali 6000T and Audioquest Niagara 5000 i realized the Ps Audio P20 is nothing else more than a great power surge protector. I believe my perception of "change" in sound was merely psychological which was confirmed once i used the power conditioners mentioned above. 
To me, the P20 is just a prettier chassis than the Furman 20i, but they both do about the same in regards to sound improvements. 
I DO NOT understand WHY manufacturers don't look at other companies to understand WHAT they do to succeed at certain things. For example, if i am a cable manufacturer and want to make better power cords, i would buy a nordost odin 1, Audioquest Dragon or Hurricane and dissect them and see what they did so i can get ideas on how to improve my own products. Listen, this is NO DIFFERENT than if you are trying to pass an exam and can't seem to pass it and you finally realize you need to pass so you need to find out what the hell your class mate did to pass it.
Where did he study? what book did he read? does he have material you can borrow so you can do better? At one point you gotta give up if you are not cutting it with a certain component. i actually have given this feedback to a few manufacturers but when you do that they feel offended or look at you with this face like you insulted them rather than seeing it as constructive criticism. Look i get it, you should aim for innovation, but if that is not happening then grab ideas (it does not mean you have to copy everything). Study the product from other manufacturers and see what the hell they do to remain successful. 

As smart as Paul Mcgowan is, i don't understand WHY he has not done this by now. However, you can lead the horse to the water, but you can't make him drink it. 
@techno....yes that cable will make an entrance here at some point. I almost bought it last week, but i need to have content for the future lol...
i actually have MANY who tell me i go through gear too fast and don't give it too much time to settle in, or that i need to have it for a few months, etc, etc. IF I held on to gear for months in order to give my thoughts we would be on page 20 of this thread and STILL working through Bryston amps....  just saying..
Power is different depending on where you live and your situation - you can't ascribe differences between filtering vs. regeneration vs. iso transformers without trying them in your own house.