Can I go wrong with Stillpoint Ultra Mini anti-vibration isolation feet?


I am researching what anti vibration isolation feet to add to my components. I came across a Galen Carol article which compared and rated various isolation devices. The Stillpoints rated the highest among isolation feet with at 9 out of 10 rating. If purchased used I could afford Stillpoints bottom of the line Ultra Minis for my Marantz KI Ruby CD/SACD player and Luxmann L507u Mk2 integrated amp. Maybe later some more for my Shunyata Hydra Denal 6000/S power conditioner. Do you think these would be a good choice for my system in their price range of maybe $350 or more a set used.

If it makes a difference the rest of my system is a VPI Classic 2 turntable with an Ortofon 2M Black cartridge, and a pair of Magico A3 speakers. The components are sitting on built into the wall shelves. The top shelf for the CD player and turntable is a slab of marble floating on a cushion of that rubbery shelf liner you can use for kitchen drawers, which is on a floating slab of 3/4" Baltic Birch plywood on another piece of shelf liner over a fixed 3/4" plywood shelf. The integrated amp is on the middle shelf similarly designed but without the marble level. The bottom shelf, the same as the middle has the power conditioner and my DISH box for watching TV.

So what do you think? Would the Stillpoints be a good choice or should I be looking elsewhere and why. Again I’m only looking for feet, not shelves or platforms. I’m sure some of you have some experience with these devices and could help guide me along as I’ve none. Thank you for your thoughts and I'd appreciate your advice.

Below are some of the more affordable higher rated isolation feet I’ve been taking a look at from the Galen Carol list along with his 1-10 rating on each. The Stillpoints are a bit more pricey, but have the highest rating, so maybe are worth the extra investment. The full list is at https://www.gcaudio.com/tips-tricks/a-brief-survey-of-isolation-devices/

Aurios Classic- Roller Ball (8)

Pro Max- Roller Ball (7)

Decouplers- Roller Ball (5)

Black Diamond Racing (BDR) Cones- Rigid (5)

Clear Audio Magix- Other (7)

Daruma IIIi- Roller Ball (7)

DH Cones- Rigid (7)

Isolation Bearings- Roller Ball (7)

Finite Elemente Ceraball- Roller Ball/Other (7)

Cerapuc- Roller Ball/Other (8)

Gingko Mini Clouds- Viscoelastic (8)

Marigo Small Cones- Rigid (6)

Reference- Rigid (6)

Stillpoints- Other (9)

Symposium Rollerblocks - Roller Ball (8)


Thanks for looking,

Mike



skyscraper
I believe the difference between the Ingress version 2 & 3 is the version 3 is more highly polished and the ball is harder. I've only used the version 3 myself in fact use 4 sets
@skyscraper yes it's just like choosing cables,it's all personal taste.I tried the roller blocks under every component,couldn't hear a difference at all though I expected to.Regarding the air pods mentioned above,I haven't tried them - but I've got an air platform under an ss integrated amp in another room which I like,tightened up the sound.Under tubes components it was awful!
What I personally like(which you may not) are sand boxes.The Dac sits on a ceramic tile, on a sandbox,on Orea mini pucks.The pre is on Orea pucks and then the sandbox.The amp is on IsoAcoustic Aperta200 speaker stands.I actually bought those to use for my speakers but once again,didn't like the sound.I like a spruce board under the speakers.All of my components are tubed.

I guess my point is to think about trying many things before spending $$.Corks,marbles,metal screws,bricks,mouse pads,dishes from the kitchen,sponges,etc.It gives you an idea if a springy footer is what you might like or something firm or spiked.Before I went with sand platforms I filled a plastic storage container with sand just to try.The sound was really night and day,so then I could move on to something more aesthetically pleasing.
@select-hifi,

Spoken like a good salesman. Not that I disagree. ,,(I own a Rock 7).

I think like most of us audiophiles, we strive for more. We've heard things...and we like it.
@fsonicsmith ,

May I ask the total weight of your TT that the Minis were supporting? They are rated @10lbs .each. I have a feeling that you overloaded the Minis.
As fate would have it the best AND most cost effective way to get outstanding iso performance in all or almost all directions of motion is by combining roller bearings of sufficiently good design with simple springs of appropriate design. The springs afford excellent isolation in the vertical direction 🔝 - probably the most critical direction - and roller bearings in cups afford excellent isolation in the horizontal plane 🔛 (infinite number of directions, no?) PLUS twist, rock and roll rotational directions. 🔄 Problem solved! 🤗

For the advanced student try a double layer mass-on-spring system for extremely low resonant frequency.