Some (most) cables do sound differently depending on which end is connected to which component. It is asserted that the conductor grain orientation is determining the preferential current flow. That might well be, but in most (all) cases the audio signal is AC (electrons going back and forth in the cable), without a DC component to justify a directional flow. Wouldn't that mean that in the 1st order, a phase change should give the same effect as a cable flip?
I'm curious whether there is a different view on this that I have not considered yet.
If wires get their "directionality" depending on how they are drawn out at the factory what does that mean for when you make a interconnect or speaker cable?
I have recently been experimenting with DIY interconnects and I have to admit I didn't pay any attention to how the wire comes off of a spool. I cut everything to size and who knows if any of the wires got their directions reversed when I put everything together. If I mismatch their direction will that cable always be a Dud? Or will it sound better since the "diodes" are canceling themselves out during the positive and negative voltage swings?
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.