Why Oh Why Isn't Anyone Building A Decent 2 Way Stand Mount Using

First off, if you’re going to build a two way with either Silver Flute woofer, you’re going to need a crossover for the woofer and the tweeter.  Trelja is correct; look closely at the SPL graphs of the drivers, and particularly the Fs (resonant frequency) of your tweeter- as a very general rule of thumb, you’re going to want to crossover at least 2 octaves beyond the tweeter’s Fs.  I strongly urge you to google diy designs-  there’s a lot to this.  Also, there’s free software that helps:  WinIsd that models box volume for ported and sealed designs, and Passive Crossover Designer which will guide you thru designing a proper crossover.

^^^ hi perkri,yes I was talking about the Decware DM945...I haven’t heard the tweeter it uses but didn’t care for the Martin Logan Motions so doubt I would like the Decware either..
As for a crossover Decware uses NONE & I'm reading several threads on DIYaudio of no crossover use so why do you say different?

diyaudio website:  “Silver Flute 6.5 8ohm/Discovery D2606” build thread.