Looking for thoughts from Nottingham Analog table owners


Really like the looks and the build quality of the Nottingham tables, and it does not hurt that I am originally from Nottingham, England to start with...lol
But I have read a few reviews that claim they are pretty tricky to set up and some suffer 60hz hum fairly easily?
Would like to hear from actual owners, your arms, carts etc
Would be upgrading from a Funk Firm Vector with Grado Gold which is deathly quiet as far as hum and in its own right is very musical in my rig.
Thank you
128x128uberwaltz
The 2nd point I meant to make was that the Kiseki took at least 40 - 50 hours to shake the bulk of the zip out of it (my experience) - way too hot for my tastes to begin with; that's somewhere between 60 and 70 albums, then it begins to settle in.  Both Upscale and Hollywood tell me that at 100 hours I can consider it 'broken in'.  I also have a Walker Audio motor controller that the Nott motor is plugged into.  I believe the motor controller helps with the overall analog presentation as well. 
Thanks for the info especially the comparisons between the kiseki and the ortofon. Though I was more inclined to get a blue NS due to price, the ortofon's less finicky nature seems better to me and every review makes it sound like just my kind of cart. I'm also interested in charisma carts and the audio Technica art9 and the clearaudio Charisma v2 MM if anyone has any thoughts on those. 
Nottingham is by no means a dark sounding table, but it is on a warmer side of neutral. My Goldring 1042 fully opened up after 100 hours, I think it was 110 or 120.
I am not surprised with the official Nottingham recommendation of Nagaoka. Nagaoka 500 is probably more refined than Goldring 1042, should be excellent choice.
Yes, Larry of Hollywood Sound really likes Spacedeck and he's been dealing with Nottinghams forever.
I heard an mp500 in my Clearaudio concept TT a couple of years ago, I remember it being a fun cart. 
I’m beginning to believe that another reason that components I own and enjoy which others claim to sound dark, veiled, imprecise, or short on detail, and which I find sound opposite those descriptions, has to do with the extremely low noise floor I enjoy in my system. Both my Nottingham turntable and my Sonus Faber Olympica III speakers have often been described by contributors on A-gon forums in terms I’ve listed above. Consider upfront components which are part of my system: a First Sound PD III linestage with dual mono construction, S upgrade, dual power supplies and NOS GE 5670 triodes; a Cary Audio PH-302 mk II phono stage with 4 NOS 1950’s RCA 6SL7’s and external power supply I had Cary build, a Core Power Technologies EquiCore 1800 power conditioner, plus a Pass X250.8, and I believe you have the makings for a very quiet, low noise floor system. First Sound’s Mr. Emmanual Go makes frequent reference to lowering the noise floor when discussing his products and upgrade paths; low noise floor is one of his primary objectives. My interpretation? Lower the noise floor and more music is presented. The music doesn’t ’compete’ with noise when signal meets speakers. At the loudness levels I listen to, (rarely an ’eleven’, sometimes just loud enough to clear the room, but usually just loud enough to allow for slightly elevated conversation in a fairly big room), now that I think of it, I’m not aware of noise in between cuts on albums. There’s lead-in noise when initially cueing albums, but after cut 1, I just don’t hear anything but music, and if there is surface noise, it is so quiet it draws no attention to itself. I’m certain this is not a new topic and much has been written about it, just thought I’d mention it given the comments re: Nottingham turntables’ sonic signatures.