2. misc-audio
  3. 128735-83996

Harmonic Resolution Systems (HRS) Platforms

Folks,

I am having trouble justifying another $7,000 for the lowest priced HRS frame, to accommodate my expensive M3x Harmonic Resolution Systems platforms.......around $2,500 each. 

While I understand that the frame and the platforms work as a "system," I currently place the M3x platforms and nimbus couplers, on a low-cost salamander rack......with decent results.

Has anyone had good results using HRS platforms on a high quality solid wood rack......walnut for example?

This would save me about $4,000 if it works.

Thanks in advance for the advice.

Labpro

 

 

128x128labpro
roxy54's avatar
roxy54
7,648 posts
 
Check out Adona racks.
randy-11
1,913 posts
 
Check out some pro lab stuff - esp. at a sale from a public university

describe your problem & gear for more help
labpro's avatar
labpro OP
85 posts
 

Hi Roxy5 and Randy-11,

I looked at the adona racks. Interesting. Thank you, I'll research further.

Randy-11, the issue is a bit complicated. If I place my HRS platforms on a solid walnut rack, I'd like to know if the wood rack will dampen (kill) the sound.

As we know, there are 2 schools of thought with regard to audio racks.....resonance producing (like a box furniture rack) and isolation (like HRS and Silent Running Audio - SRA etc).

As a test. I paced a couple "resonating" platforms under my turn table and preamp, and the sound literally died. This is why I'm hoping that using a solid wood rack (isolation) + my HRS platforms, may do the trick.

Labpro  



tom6897's avatar
tom6897
1,484 posts
 
Stick with well constructed solid hardwood stands made from walnut, maple or birch. If needed you can always reinforce the underside of the shelving with Dynamat or sorbothane like adhesive contact paper. Personally I have had great success with the IKEA Lak table which is very thick MDF joined with strong heavy duty lag nuts and bolts. I have two joined together. Dead solid quiet without sucking out the dynamics and musicality from the system.
labpro's avatar
labpro OP
85 posts
 

Hi Tom6897,

I admire your resourcefulness. The Ikea Lack table is very inexpensive.

The low cost Salamander rack I currently have, is also made of heavy MDF, and it sounds pretty decent.

I'm going to take a chance on a walnut hi fi racks system.

http://www.hifiracks.co.uk/products/hi-fi-racks/Podium-Reference

I hope placing the HRS platforms on this will work.

Labpro

More to discover