2. cables
  3. 128300-75330

Changing internal cabling, anyone use Jantzen solid conductor?

I have a pair of Mirage M1 speakers and I'm replacing the internal cabling. The existing cables, I can see, are oxidized and over 20 years old. Cable technology has come a ways since then. So I decided to go ahead and replace them.  I saw these jantzen cables, wonder if anyone has used them and what's the result. 

http://www.hificollective.co.uk/wire/006-0085-jantzen-bi-wire-speaker-cable.html

Years ago I used dh labs t14 for internal cabling and it was detailed and fast and I liked it. But I need around 45 feet. And dh labs has gone up in price since I used it years ago. So I'm looking for a more cost effective method which will still lend excellent results, assuming there is such a cable.

Again thanks to all who respond to my posts your information has been sincerely appreciated.
idahifi
grannyring's avatar
grannyring
6,436 posts
 
Get the new Duelund 16ga stranded and thinned wire in cotton for $10 meter from Parts Connextion. Duelund as has a new 20ga for $7 meter I think. They are just wonderful.
idahifi OP
100 posts
 
Is that the hook up wire? 10.00 meter, but it's a single wire I think.
grannyring's avatar
grannyring
6,436 posts
 
Here is the part number, yes under hookup wire and sold as a single strand. Simply twist every 1.5 - 2 inches and mark one positive and negative with heat shrink on the very ends. Do not terminate, just use the bare wire. Bested my $2000 cables and others have had the same experience,.

http://www.partsconnexion.com/duelund-81514.html
dgarretson
2,586 posts
 

For internal speaker wires and external speakers cables I’ve used Rio Grande dead soft .999 silver foil inside McMaster Carr polyolefin heat shrink tubes. This compares well with Duelund silver foil in silk wrap at reduced cost. For long runs you can double or triple up.

https://www.riogrande.com/Product/999-Fine-Silver-1-4-Plain-Strip-Wire-28-Ga-Dead-Soft/101076

More to discover