2. cables
  3. 128063-90699

100 - 125.00 RCA, and coax recommendations please

I will apologize in advance as I’m sure there are many threads similar to this one, but being an owner in the restaurant biz means I have almost no time for myself, so I started a new one in hopes of getting some good/quick input.

Building a new 2-channel system, and of course, I’m just getting all caught up in the wire game. Just spent a good chunk of money on Furutech power wires/filter/distribution for all my gear (bought new, and used), and now I’m in need of 3 pairs of RCAs. .I guess you could say, I’d like to stay on the cheaper end of the budget for ICs, so I’m hoping to get into some good stuff in the 100-125.00 price range (per pair). Needing 1 pair @ 1 Meter and two pairs @ 2 Meters. Also in need of a good coax to go to DAC (I2S will be used later in conjunction with dedicated PC/Singxer)

System consists of a pair of Accuphase P-266 amps, W4S DAC-1 or another DAC I’m currently breaking in, modding and trying out right now, building a dedicated music PC that will be running Roon/HQ player, CEC 3300R as a transport, Tortuga Passive Pre, and Von Schweikert VR-4s (stage1 upgrades)...I do also own a pair of Emotiva XPA-2s that I am considering bridging to the lower half of of the VR-4s and bridging the 266’s to the top half....I know it’s a lot of power, but you can never have too much...right? Speaker wire is Furutech μ-2T on the low frequency section of the VR-4s and I am still undecided on the top half ( μ-2T or possibly the S-14 unless you guys can recommend something better in the lower price ranges)

Was thinking Blue Jeans for the coax, but any, and all input is greatly appreciated.
It’s been a while since I’ve shopped for ICs, and I’m just looking for some ideas at this point, so please help guys.

Many thanks



audioanomaly1
audioanomaly1 OP
8 posts
 
Heres one of the discussions:

http://audiokarma.org/forums/index.php?threads/bi-amping-von-schweikert-vr4.666700/

And, I stand corrected...4ohms on the bottom, and 8 on top from what I'm seeing. I assumed a lighter load than that at each set of terminals. Thats what I get for assuming. Thanks for pointing that out tls49

Well this thread went in a much different direction than expected, hahaha
gdnrbob
4,407 posts
 
Regarding cables, I just remembered another supplier:
http://www.cs1.net/products/cables.htm
Simple cables at a fair price, you can always upgrade later.
+1 tls, I agree vertical biamping/monoblocks is the way to go. You are going down a slippery slope going horizontal. (That sounds dirty, doesn't it)?
Bob
audioanomaly1 OP
8 posts
 
Ha! Yeah it did...Thank you gdnrbob.
Understood on the horizontal. As stated, the idea was sparked from the above mentioned sources, and I'm always open to different things, especially in this industry. I would assume that a recommendation coming from VS and other VR-4 users would warrant a try, and I will most likely do so just for the sake of it. The impedance of the lower half of the speakers sure changes things in terms of bridging, so no-go there.

Appreciate the link sir!
More to discover