2. speakers
  3. 1266090737

Stick with Aerial 20T to play above 100Hz? Or MBL?

Hello,
I have Aerial 20T mkII, but because of room limitations I feel they output too much bass. If I am placing the 20Ts where they produce a large soundstage, which is close to the side walls, and where the midrange is fantastic I get problems in the 80Hz region. I have two Aerial SW12s and when I use these under 100Hz (and with their built-in EQ) and the 20Ts from the high pass output to play above 100Hz I am quite happy, much better result than with 20Ts alone.

This has led me to think maybe there are other speakers that would be better than the 20Ts, superb performers above 100Hz and that also would do a great job in HT, although music is no. 1 priority.

I am thinking of MBL 111f or maybe monitors like Tidal Amea Diacera.

I use my speakers in a combined 2ch/HT setup. The rest of the speakers are all Aerial Acoustics. My room is 14x18. Speakers along short wall.

What do you think?
cappuccino
brf
1,715 posts
 
It is not your speakers, it's your room that is causing your problems. Invest is acoustic treatments or maybe even hire an acoustical engineer. The 20T are awesome speakers.
cappuccino OP
118 posts
 
Thanks, but I must say I already have; several DaaD 3&4 modules as well as products from Auralex. An acoustical engineer has inspected my room and given me compliments of beeing one of the best rooms he has ever heard! But have in mind, it is not easy to treat low bass. And I feel the 20Ts just produce too much bass in my room, at least according to my taste.
jallen
502 posts
 
You need more room damping, you are getting a midbass bump which will likely be with most speakers putting out anything significant below 100 cycles. I have heard the MBL 111, and they are very nice, but sound flat if only playing at a modest level. They sound best with their ears folded back and cranking it out, then the stage is glorious, but lacking the delicacy of your 20T which is a speaker I like very much. (I had the 10T, another great one, and it was short a ribbon tweeter from superb.) But, as the level goes up, so does your bump.....I would work more on your room, and I even apply under tables, and counters with Auralex type of foam, and this sucks more out of that standing wave. A small room is easily overloaded in that region. I even line the top of cabinets that do not go to the ceiling and this is invisible and takes up no room.
Jallen
More to discover