Tube integrated amp less than 12" in depth?


I am looking for an integrated tube amp that will fit in my office. I play CD's on an Underwood mod 1 Jolida 100D with Siemens and Amperex Bugle Boys, at low volumes with a Creek 5350 SE and biwired-Proac Response 1s. The sound is great but I miss tubes in the amp..........and it plays 12 hours a day.
Room size 14 X 16 feet.
Any suggestions for that "tube" sound?
The equipment is housed in a lockable closet and cant be more than 12" deep to fit. It is locked as my partner likes to come in and turn the sound off!!:) (Philistine)
springbok10
Thanks, Boa2. Wonderful suggestion. How would 12W work on a speaker of 86 db sensitivity? The dimensions would work out great. I could replace the Proacs with Totem Sig 1s, that I have at home - 86 db and 4 ohms.
Any experience with these amps without horns?
Denis
SETs seem to be the answer - the Almarro 318 may do the trick.
Thanks for your help.
86 dB, would IMO, be a little bit low on the sensitivity scale for a 12wpc amp, if you were looking for anything close to realistic volumes. But of course, a lot depends on music type. I am guessing you do not run the volume high in a home office. If you are just looking for background levels, then it should be fine.
I listen exclusively to classical, but sometimes turn it up when everone has left:) generally low volumes, but detail and nuance are critical. The SET Almarro 318 is 18 watts. Enough?
I've heard this amp on a speaker (non-horn) with 89dB efficiency, and it drove it just fine in a room that was around 14' x 15'.
To reiterate what Swampwalker said, with the type of music you want to listen to, and at the stated volume, I think you would be just fine. And the amp really sounds nice. On this particular one, I would suggest swapping the Sovtek 6922 for something NOS.
Hope that helps.

Howard